23336
35
Zoom out
Zoom in
Previous page
1/322
Next page
Getting started
23
850-165186 / Rev.B
Rip: Check for damages!
The Rip sensor is identical to the Catch sensor, and can thus be
regarded as a application for the Catch sensor. Place the sensor
on the trawl belly behind the footrope, and use it to detect if the
trawl is torn o r in any other ways damaged by r ocks or other
roughness on the bottom. If this is detected immediately you can
adjust the gear to minimise the damage.
Spread and Remote: Check the trawl doors!
This dynamic duo tells you the exact distance between the trawl
doors. Used on bottom and pelagic trawls the Spread and
Remote sensors p rovide crucial information about your trawl
behaviour. On a twin trawl, simply add a Remote sensor and
you have both openings covered!
These two sensors always work in pairs. They are used to
monitor the physical distance between the trawl doors during
bottom and pelagic trawling.
Use a Spread sensor on the port door and a Remote sensor on
the starboard door. Both sensors are normally mounted in
special adapters, but you may also attached them to the
wing-end or warp using snap hooks or rope.
The Spread sensor communicates with the Remote sens or using
a special transverse communication link. By means of this link it
measures the excact distance (maximum 350 meters) between
the two sensors. The information is is transmitted t o the vessel
by the Spread sensor.
As you already know, correct door spread is important in order
to obtain the correct sweep-angle, as this ensures optimal trawl
performance. Door behavior and stability during shooting and
towing is also monitored by these sensors. Many regard this pair
of sensors one of the most important sensors to obtain efficient
trawling.
A special version of the PI Spread sensor, The PI Twin Spread,
allows you to use a single Spread sensor with two Remote
sensors to monitor a twin trawl.
Temperature: Too warm or too cold water?
Fishingintoowarmortoocoldwatermaybejustawasteof
time and money. The same applies to a pelagic trawl placed on
the wrong side of a thermal layer. Using advanced technology,
rugged construction and awardwinning design, the PI
Temperature sensor allows you to increase your fishing
efficiency.
The PI Temperature sensor tells you the exact sea water
temperature while you are fishing.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad PI54 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad PI54 in the language / languages: English as an attachment in your email.

The manual is 10,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Simrad PI54

Simrad PI54 User Manual - Norwegian - 108 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info