612631
24
Zoom out
Zoom in
Previous page
1/96
Next page
22 |
Waypoints, routes & tracks | NSS Operator Manual
Moving a waypoint by tapping the screen
1. Select the waypoint by tapping it
2. Activate the menu and select the move option
- The waypoint icon will change to indicate moving mode
3. Tap on the chart panel to select a new position
4. Confi rm the new position by pressing the rotary knob, tapping the panel key or by using the
options in the menu
Routes
A route consists of a series of routepoints entered in the order that you want to navigate
them.
When you tap on an existing route, it will turn blue and the route name will be displayed.
Creating new routes
1. Select the new route option from the menu
2. Tap the panel to position the fi rst waypoint
3. Continue tapping the chart panel until all routepoints are positioned
- A waypoint can easily be re-positioned by dragging it to the new position
4. Save the route by tapping the Finish editing panel button or by using the options in the
menu
The route can also be created from the Routes panel described later in this section.
Edit a route
A route and a waypoint can only be edited from the chart panel when the item is selected.
1. Tap the route to make it active
2. Activate the menu and select the route and edit option
3. Tap the panel to add a new routepoint
If you tap on a leg a new point will be added between existing routepoints
If you tap outside the route the new routepoint will be added after the last point in the route
4. Drag a routepoint to move it to a new position
5. Save the route by tapping the panel button or by using the options in the menu
Note: a single routepoint can be moved by tapping the routepoint and then selecting the
move option in the menu.
T r acks
A track is a graphical presentation of the historical path of the vessel, allowing you to retrace
where you have travelled. A track can be converted to a route in the Tracks panel, as described
later in this section.
From the factory, the system is set to automatically draw a track. The system will continue to
record the track until the track length reaches the maximum trail point setting, and will then
automatically begin overwriting the oldest track points.
The automatic tracking function can be turned off from the Tracks panel described later in
this section.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad NSS8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad NSS8 in the language / languages: English as an attachment in your email.

The manual is 3,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Simrad NSS8

Simrad NSS8 Installation Guide - English - 66 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info