612631
13
Zoom out
Zoom in
Previous page
1/66
Next page
|
11
Planning the installation | NSS Installation Manual
Check the contents
2
3
4
5
5
6
7
8
910
2
1
Key Description Key Description
1 Sun Cover 6 Mounting bracket (NSS7 & NSS8 only, option
for NSS12)
2 Cosmetic screw covers (x2) 7 Bracket mount rear bezel (NSS7 & NSS8 only,
option for NSS12)
3 NSS Display 8 Power cable
4 Flush mount gasget 9 Flush mount machine screws (x4)
5 Bracket knobs (x2 - NSS7 &
NSS8 only, option for NSS12)
10 Bracket mount rear bezel securing screws (x4 -
NSS7 & NSS8 only, option for NSS12)
Mounting location
Choose the mounting locations carefully before you drill or cut. The display should be
mounted so that the operator can easily use the controls and clearly see the display screen.
Be sure to leave a direct path for all of the cables. Simrad displays are high-contrast and
anti-re ective, and are viewable in direct sunlight, but for best results install the display out
of direct sunlight. The chosen location should have minimal glare from windows or bright
objects.
The enclosure that the display is mounted in should be dry and well ventilated. The ventila-
tion of the space behind the unit should be enough to prevent excessive heat build up as a
combined result of radiated heat o the heat sink, and sunlight heating of the enclosure. In
very small enclosures, also subject to heating from the sun, it may be required to  t forced
cooling.
Ensure that any holes cut are in a safe position and will not weaken the boats structure. If in
doubt, consult a quali ed boat builder.
Before cutting a hole in a panel, make sure that there are no hidden electrical wires or other
parts behind the panel.
Do not mount any part where it can be used as a hand hold, where it might be submerged, or
where it will interfere with the operation, launching or retrieving of the boat.
NSS_IM_EN_988-10107-003.indd 11 20/08/2013 4:55:19 p.m.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad NSS8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad NSS8 in the language / languages: English as an attachment in your email.

The manual is 5,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Simrad NSS8

Simrad NSS8 User Manual - English - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info