572713
55
Zoom out
Zoom in
Previous page
1/96
Next page
| 53
The echosounder | NSS Operator Manual
Placing a mark on an echosounder image
You can position a mark at the vessel’s position by pressing and holding the MENU key.
You can position a mark on a selected echosounder item by tapping the screen and then
activating the menu.
Note: Only marks positioned by using the cursor will include depth information.
Measuring distance
The cursor can be used to measure the distance between the position of two observations on
the sounder image. It is easier to use the measure function when the sounder image is
paused.
1. Activate the menu to start the measure function
- The cursor will be positioned in the middle of
the panel, and the distance will be measured
from this position
2. Tap on the screen to select the second measuring
point
- A line will be drawn between the measuring
points, and the distance will be listed in the
Information window
3. Continue tapping the screen to position new measuring points
When you press the Finish measuring panel button or the
X key the echosounder will
resume to normal scrolling.
Pausing the echosounder
You can pause the sounder, allowing you to examine the sounder echoes. The function is
activated from The echosounder settings panel”, see page 55.
This function is useful when you need to position a waypoint exactly on the echosounder
panel, and if you are using the cursor to measure a distance between 2 elements on the
image.
Recording the echosounder data
You can record echosounder data and save the fi le internally in the NSS unit, or on to a Micro-
SD card inserted into the units card reader.
The function is activated from The echosounder settings panel”, see page 55.
The following options are available:
Bytes per sounding
Select how many bytes per seconds that are to be
used when saving the log fi le. More bytes yield better
resolution, but will cause the record fi le to increase in
size compared to using lower byte settings.
Log all channels
Logs all available sonar data simultaneously.
When logging all channels, logs are saved in SL2
format instead of .slg format.
Log in XTF format
Optional logging format for SideScan data. This will only be available when a StructureScan
unit is connected.
This format does not log all channels into one fi le. The format is used for third part application
support on the PC (like SonarWiz) that need access to the StructureScan data.
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad NSS Chartplotter at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad NSS Chartplotter in the language / languages: English as an attachment in your email.

The manual is 6,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Simrad NSS Chartplotter

Simrad NSS Chartplotter Installation Guide - English - 66 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info