572713
17
Zoom out
Zoom in
Previous page
1/96
Next page
| 15
Charts | NSS Operator Manual
Using the cursor on the chart panel
The cursor is by default not shown on the chart panel.
When you tap the screen, the cursor will become visible and the cursor position window will
be activated. When the cursor is active, the chart will not pan or rotate to follow the vessel.
To remove the cursor and cursor window from the panel, press the
X key or tap the Clear
cursor panel key.
Pressing the
X key repeatedly will toggle the chart center between the vessel and the cursor
position.
Displaying information about chart and chart objects
When you tap a chart item, a waypoint, a route or a
target, basic information for the selected item will
be displayed.
By tapping and holding or by pressing the rotary
knob when a chart item is selected, all available
information for that item will be shown.
The information can also be displayed by using the
menu.
Note: Popup information has to be enabled to see
basic item information.
If the cursor is not active, available information for
objects close to the vessel can be displayed.
If no information is available, the info menu item
will not be shown.
Placing waypoints
You place a waypoint by tapping the chart panel on
the selected position and then activating the menu.
Creating routes
You can quickly create routes by tapping the chart panel.
1. Activate the menu
2. Tap the screen to position the fi rst routepoint, and then continue tapping the screen to place
the remaining routepoints
3. Save the route by tapping the Finish editing panel button or by activating the menu
Dragging waypoints
1. Tap the waypoint to make it active
2. Drag the waypoint to the new position
The waypoint position will be automatically saved.
Measuring distance
The cursor can be used to measure the distance between your vessel and a selected position,
or between 2 points on the chart panel.
1. Tap the screen on the place to where you want to measure the
distance from the vessel
2. Start the measure function from the menu
A line will be drawn from the vessel center to the cursor position,
and the distance will be listed in the Cursor Information window
3. Continue tapping the screen to position new measuring points
You terminate the measuring function by pressing the
X key or the Finish measuring panel
key.
See “Waypoints,
routes & tracks on page 22
for more information about
waypoints and routes.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad NSS Chartplotter at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad NSS Chartplotter in the language / languages: English as an attachment in your email.

The manual is 6,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Simrad NSS Chartplotter

Simrad NSS Chartplotter Installation Guide - English - 66 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info