39209
117
Zoom out
Zoom in
Previous page
1/122
Next page
Fault Finding
20220760L 115
DATA DETECT
SYC 255 SPD 255
DPT 255 POS 255
HDG 255 NA1 255
W
ND 255 NA2 255
GENERAL
Roblink Sync. OK
Compass heading OK
Wind Speed & Angle OK
Depth OK
Boat speed (Water) OK
GPS Position data OK
Navigation data OK
Waypoint/Route navigation active
All displayed items will start counting at 136. If data are OK
they will count up and stop at 255.
If data are not OK they will count down and stop at 15.
On the IS15 Wind, Tack and Compass the Roblink test only
monitors the data utilized by the instrument head, e.g. wind data
or compass heading.
Press and hold the
button for 10 seconds to enter the
installation menu.
Press the
or button until the display reads tESt.
Press and hold the
button for 2 seconds to start the test. As
on the Combi, the display will start counting from 136.
There are three more displays available for roblink testing:
Message rate
Messages are sent with a fixed rate from 1 to 5/second. Example:
Heading (HDG) is sent with a rate of 5 and depth (DPT) with a
rate of 2.
Under normal operation the numbers are steady. If the reading
becomes erratic it indicates a problem on the Roblink.
Checksum Err(or)
Counts up detected check sum errors. A check sum error up to
5% of sent message is acceptable.
Verify how much each message is counting up in a periode of
one minute.
Examles:
If a message with a rate of 1 has more than 3 errors in a period of
60 seconds, it indicates a problem on the Roblink.
If a message with a rate of 5 has more than 15 errors in a period
of 60 seconds, the same problem exists.
The fourth display tells you if an instrument is sending NMEA
data to the Roblink.
117


Need help? Post your question in this forum.

Forumrules
1

Forum

simrad-is15

Reset search

  • Simrad is15 multi???
    How do u convert display depth meters to feet?
    Help Submitted on 17-6-2023 at 13:49

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad IS15 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad IS15 in the language / languages: English as an attachment in your email.

The manual is 2,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Simrad IS15

Simrad IS15 User Manual - German - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info