39209
110
Zoom out
Zoom in
Previous page
1/122
Next page
IS15 General Manual
108 20220760L
Condition Probable Cause Action
One or more
instrument(s) always
show ‘----’, with the
pointer of analog
instruments at their
zero positions.
No data is reaching
the affected
instrument(s).
Check the signal wiring to the affected
instrument(s).
Check Roblink data by entering the
Roblink test menu on a Combi instrument.
See the following fault finding charts for
details.
Wind Display Faults
Condition Probable Cause Action
There are no Wind
Speed or Wind
Angle displays, or
these displays
always show ‘----’.
The wind transducer is
not fitted to the mast
head connector.
The wind transducer is
not connected to the
IS15 Transceiver
properly.
Check, and fit the transducer if necessary.
Check the wind transducer’s Roblink
connection to the Transceiver.
Check that the wind transducer cable is not
damaged.
Check the connections in the Junction Box
at the mast foot.
Contact your dealer.
The Wind Speed
displays always
show ‘0.0’, but the
Wind Angle displays
are shown.
The anemometer
(cups) is seized.
Check the anemometer cups and have the
wind transducer serviced if necessary.
A broken anemometer cup may be
replaced by the dealer/customer.
The Wind Speed is
too low, when it was
previously correct.
Worn anemometer
cups/bearing.
Damaged anemometer
rotor or transducer
body.
Check the anemometer cups and rotor
bearings or have the wind transducer
serviced if necessary.
Check that the rotor (cups) and transducer
are not damaged.
Make other checks as for ‘always showing
0.0’ above.
The Wind Speed is
too high or erratic,
when it was
previously correct.
Damaged wiring
causing intermittent
contact.
Make checks as for ‘always showing 0.0’
above.
110


Need help? Post your question in this forum.

Forumrules
1

Forum

simrad-is15

Reset search

  • Simrad is15 multi???
    How do u convert display depth meters to feet?
    Help Submitted on 17-6-2023 at 13:49

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad IS15 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad IS15 in the language / languages: English as an attachment in your email.

The manual is 2,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Simrad IS15

Simrad IS15 User Manual - German - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info