39209
35
Zoom out
Zoom in
Previous page
1/122
Next page
Operation of IS15 Multi
20220760L 33
3.5 Screen Group 1: Depth
There are five screens in this group:
Screen 1
DEPTH
The upper screen section displays ‘DEPTH’ and the data unit,
e.g. ‘MTRS’. An arrow indicates a rising () or falling ()
bottom. A bargraph indicates the strength of the signal. If the
depth signal is from an external source on NMEA format, an
“E” will replace the bargraph.
The lower screen section displays the water depth reading.
Note ! If the system depth transducer signal is lost, the Depth display
will flash the last good echo value for one minute, then it will
show ---. If there is an alternative depth input to the system on
NMEA format and the sounder is set to Off, this depth will be
displayed instead.
Screen 1 has two sub screens. One for switching the depth
sounder on and off and one for setting the depth damping.
Depth Sounder On / Off
In certain circumstances, e.g., to save power in known waters or
when out of depth range, you may want to turn the depth sounder
off. It is also recommended to turn it off if there is another
sounder on board operating on the same (200 kHz) frequency.
Interference between the two can thus be avoided.
Note ! When the sounder is turned off, the display will show OFF
instead of the depth reading.
Follow the instructions in Figure 3-2, page 32 to access the depth
sounder ON/OFF screen. With the ON-screen flashing select
OFF and return to Screen 1 as per instructions.
This setting is not affected by power off/on or a Communication
Reset but will default to ON after a Master Reset.
Depth damping
The displayed depth has four levels (0-3), 0 = Off. On power up
the last set damping is selected. To change the depth damping
level follow the procedure in Figure 3-2, page 32 and select the
wanted damping level.
The higher the figure the more damping.
35


Need help? Post your question in this forum.

Forumrules
1

Forum

simrad-is15

Reset search

  • Simrad is15 multi???
    How do u convert display depth meters to feet?
    Help Submitted on 17-6-2023 at 13:49

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad IS15 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad IS15 in the language / languages: English as an attachment in your email.

The manual is 2,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Simrad IS15

Simrad IS15 User Manual - German - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info