23322
77
Zoom out
Zoom in
Previous page
1/108
Next page
FS 20/25 Operators Manual 901-10037001/1.1
Maintenance and Troubleshooting Page 5.
5
Kongsberg Simrad Mesotech Ltd.
Port Coquitlam, BC - Canada
5.3.2 Trawl Unit
The Trawl Unit is subjected to the harshest conditions, and therefore proper
handling and maintenance is crucial to ensure trouble free operation.
5.3.2.1 Handling Tips
Though the trawl unit electronics are ruggedized for the fishing environment,
mishandling or repeated impacts may result in damage to, or failure of, the
electronic components. Care should be taken at all times to avoid dropping
or impacting the trawl unit or the individual components.
Avoid scratching the surface of the sonar head and sensor module housings.
The anodized surfaces are there to protect the electronic housings from
corrosion and any damage to these surfaces will increase the likelihood of
corrosion.
Ensure correct installation of the sonar head into the trawl housing to avoid
improper operation or damage to the transducer and shaft. Both the
retaining rings and the locating pin (or locating bracket) are required.
Protect connector mating surfaces from corrosion and damage. At first sign
of damage, connectors should be replaced!
Pigtails must be properly attached to trawl cable, and the connector mating
surface must be protected from moisture and dirt all times. Failure to do this
may result in water damage to cable, causing improper operation of the
sonar system.
5.3.2.2 Maintenance Schedule
For optimum performance and trouble free operation, follow the maintenance
schedule below.
Beginning of Fishing Season
Service all connectors
Every Two Weeks of Continuous Use
The trawl unit package should be opened and the components cleaned
with fresh water. The sonar head and sensor module should be
inspected for corrosion or damage. Service all connectors. The FS
processor should be checked and cleaned if required.
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad FS25 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad FS25 in the language / languages: English as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info