23322
21
Zoom out
Zoom in
Previous page
1/108
Next page
FS 20/25 Operators Manual 901-10037001/1.1
Theory of Operation Page 2.
5
Kongsberg Simrad Mesotech Ltd.
Port Coquitlam, BC - Canada
Note that scattered fish can be perceived as reverberation. The RCG filter must be
used with care if scattered schools are to be detected.
2.1.4.3 RX Gain Response and Type
The setting of the “RX Gain Response” determines the response of the filter
algorithm as selected by the “RX Gain Type”. For the AGC, this setting determines
the speed by which the gain is adjusted. For the RCG, this setting determines the
influence of the previous ping average over the current ping. If set to Slow, the
overall average is given by the sum of 20% current and 80% of previous average. In
Medium this ratio is 50% to 50%, and the Fast, the ratio is 80% to 20%.
2.1.4.4 Pulse Length Control
The FS20/25 Trawl Sonar Heads are capable of changing the acoustic pulse length
that is transmitted. The surface processing unit calculates the pulse length based on
the operating range of the sonar head. It is generally better to use a longer pulse as
the operating range increases. However, the actual value can be optimized to
enhance the details in the sonar image (Optimize Resolution) or to increase the
target visibility at long distance away from the sonar head (Maximum Range). The
system will automatically set the pulse length to match the range, unless manually
adjusted by the operator.
2.1.4.5 Optimize Resolution
The pulse length selection can be optimized to enhance the detail of the targets. It
has been experimentally determined that the pulse length corresponding to 40% of
the sample period can increase the image resolution and details for targets that are
generally larger than a few samples. This pulse length increases linearly with
increasing the operating range.
2.1.4.6 Maximize Range
The pulse length calculation can be optimized to increase the detection range of the
sonar head. Generally, the longer the pulse length, the more energy is transmitted
into the water which could then travel a longer distance and get reflected from the
targets that are further away from the sonar head. It has been determined that the
pulse length corresponding to 80% of the sample period can increase the detection
distance of the targets without major drain on the sonar head power supply. This
pulse length increases linearly with increasing the operating range.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad FS25 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad FS25 in the language / languages: English as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info