23320

Simrad FS20 Manual

92
Zoom out
Zoom in
Previous page
1/108
Next page
901-10037001/1.1 FS 20/25 Operators Manual
Page 5.20 Maintenance and Troubleshootin
g
Kongsberg Simrad Mesotech Ltd.
Port Coquitlam, BC - Canada
Problem Action/Possible Cause
• Message Log Errors • ID 256 indicates some problem with
the Vertical Section (LF1 or COM1)
• Message Log Errors • ID 512 indicates some problem with
the FS925 Section (LF2 or COM2)
• Message Log Errors • As mentioned, there is an error code
with the ID that can relayed to a
repair facility by FAX or E Mail to aid
in determining how the unit is failing
5.5.3.2 PWR/TTM Unit to Deployment Package Units (Analog)
The “information” that is exchanged between the PC and the LF Sub-assemblies is
in a digital format. The digital commands are translated into an “analog” format in
the LF Sub-assemblies and sent down the 3
rd
wire to the heads. The analog
response from the heads, whether it is a command acknowledgement or sonar video
and status, is relayed back up the 3
rd
wire and translated back into a digital format
for transmission to the PC, where it is then displayed on the monitor.
Diagnosing a problem in this area is difficult; the fault could be in the LF Sub-
assembly issuing commands and receiving responses from the head or with the
head itself receiving the commands and responding. In the field, you could verify a
fault in the Vertical section (LF1 Sub-assembly) by running a back up vertical head.
If the second head doesn’t work, the problem likely is in the PWR/TTM. The
problem could also be in the FS925 head (see chart below for explanation). If the
backup head does work, the problem is almost certainly in the first head.
The same logic can be applied to the FS925 head, if you carry a back up FS925 on
board. If not, it will almost certainly require a service representative to isolate and
repair a problem in the FS925 section.
There will be specific head problems and symptoms discussed in the next section.
… 92 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad FS20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad FS20 in the language / languages: English as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info