23320
78
Zoom out
Zoom in
Previous page
1/108
Next page
901-10037001/1.1 FS 20/25 Operators Manual
Page 5.6 Maintenance and Troubleshootin
g
Kongsberg Simrad Mesotech Ltd.
Port Coquitlam, BC - Canada
End of Fishing Season
The trawl unit package should be opened and the components cleaned
with fresh water. The sonar head and sensor module should be
inspected for corrosion or damage. Service all connectors and cover
them with plastic. Store units in a dry, clean area.
Every Twelve (12) Months Heavy usage or Every Two Years
Return the sonar to a qualified Simrad service facility for inspection of
connectors, seals and shaft assembly. Have parts replaced as required.
Every Four Years
Both the sonar head and the sensor module should be returned to a
qualified Simrad service facility for re-calibration and upgrade to the latest
specifications, and inspection of connectors and housings for damage.
5.3.2.3 Connector Maintenance
Proper connector maintenance is crucial to the prevention of connector failure that
may result in failure of the sonar system and possible water damage to the sonar
head or sensor module. The following steps should be taken whenever the
connectors are assembled, or at regular intervals as outlined in the “Maintenance
Schedule” section above.
Wipe connectors clean of old grease and dirt with a lint-free cloth.
Inspect the connector’s metal contacts and sealing surfaces for corrosion,
wear or damage. If any found, return unit to a qualified Simrad service
facility for replacement of the connector!
Apply liberal amounts of Dow Corning “55” grease to each of the connector
prongs and to the sealing surfaces of the connectors. Do not use a silicone
rubber adhesive sealant!
Press connectors together until fully seated. Excess grease and any
trapped air should be squeezed out of the connector sockets.
Hand-tighten the locking sleeve. Do not use a wrench or pliers!
When separating the connectors, avoid wrenching or bending connector.
Caution!
Failure to correctly maintain connectors may cause damage to
the system and will void warranty.
78


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad FS20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad FS20 in the language / languages: English as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info