28530
155
Zoom out
Zoom in
Previous page
1/182
Next page
Data interfaces
147
850-164692 / Rev.B
Issue commands on server
Request
A Request message must be sent to the server application in
order to issue a command on one of the available command
targets in the server application. An example of the main
elements of a command request is shown below.
struct Request
{
char Header[4];
// ”REQ\0”
char MsgControl[22];
// Sequence no, Current msg no, Total msg no
char MsgRequest[1400];
// XML based command request
}
MsgControl
The MsgControl field consists of the following parts:
Sequence number - incremented for each request message
sent to the server
Current message - contains the current message in case a
request must be split into several UDP messages.
Total message - contains the total number of messages the
current request consists of.
If the contents of MsgControl is ”2,1,3\0 it means that the
current UDP message is the second request message sent from
the client to the server, and that the current message is message
number 1 of a request that consists of a total of three UDP
messages.
MsgRequest
The contents of the MsgRequest depend on the current
command target and will be described in detail later. For the
moment it is enough to say that the format of the request is
XML based and that the request must specify a command target,
a method on the command target and any input parameters
relevant for the current method. The general structure of a
request is shown below.
<request>
<clientInfo>
<cid>clientid</cid>
<rid>requestid</rid>
</clientInfo>
<type>invokeMethod</type>
<targetComponent>xx</targetComponent>
155


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad ER60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad ER60 in the language / languages: English as an attachment in your email.

The manual is 3,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info