28530
151
Zoom out
Zoom in
Previous page
1/182
Next page
Data interfaces
143
850-164692 / Rev.B
Requesting server information
Before you connect to the server running the echo sounder
program, your client application must obtain information about
the server’s IP address and command port number.
RequestServerInfo
Send the following RequestServerInfo message to the specific
IP address of the server, or broadcast the message to receive
server information from all servers on the LAN. The message
should be send to the UDP port number found in the Local port
fieldontheServer page in the Remoting dialogue box in the
server application.
struct RequestServerInfo
{
char Header[4]; // ”RSI\0”
};
ServerInfo2
The server applications will respond to the requesting
application with a message containing information about the
server application. The content of the ServerInfo2 message is
shown below.
struct ServerInfo2
{
char Header[4];
// ”SI2\0”
char ApplicationType[64];
char ApplicationName[64];
// Name of the current application
char ApplicationDescription[128];
// Description of the current application
long ApplicationID;
// ID of the current application
long CommandPort;
// Port number to send commands to
long Mode;
// If the application is
// running against the local data source or
// a remote data source
char HostName[64];
// IP address of the computer the
application is running on
};
CommandPort
The server UDP port number CommandPort must be used
from now on to send commands to the server application.
151


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad ER60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad ER60 in the language / languages: English as an attachment in your email.

The manual is 3,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info