28530
116
Zoom out
Zoom in
Previous page
1/182
Next page
Simrad ER60 Operator manual
108
850-164692 / Rev.B
Sensors - This column is used to identify the external sensor
currently connected to the serial line.
Add - If you have added additional serial lines to the computer
(for example by installing an extra interface circuit board), you
can press Add to identify the new ports. If you have previosuly
released an unused serial port, but wish to bring it back to ER60
use, you must also press Add to include it.
Remove - Once the ER60 has identified and listed all the
available serial lines on the computer, these can not be used by
any other software applications on the same computer. However,
if the ER60 does not need a specific serial line, it can be
released for other use when you select it and press the Remove
button.
Setup - Select a serial line and press the Setup button to
configure the communication parameters.
LAN ports
Local IP - This is the IP number of the network card in your
computer that you wish to use.
Local port - This is local port you wish to use.
Remote IP - This is the IP number of a remote computer. For
point-to-point communication, you must define this IP address.
If you wish to broadcast information, enter IP number
255.255.255.255. For inputs, you do not need to set up this
parameter.
Remote port - Set up the remote port only if applicable for
point-to-point data export.
Protocol - Each ethernet line can communicate with more than
one sensor simultanously provided that each sensor use the same
protocol.
Sensors - This column is used to identify the external sensor
currently connected to the serial line.
Add - If you wish to assign a new port to the existing network
card, or add a new network card, press Add to identify the new
port(s).
Remove - Use this feature to remove ports you do not need.
Setup - Select a LAN port and press the Setup button to
configure the communication parameters.
116


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad ER60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad ER60 in the language / languages: English as an attachment in your email.

The manual is 3,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info