28530
35
Zoom out
Zoom in
Previous page
1/182
Next page
Operational procedures
27
850-164692 / Rev.B
2 Place the second and third winches on the same vessel
side as the transducer and at equal distances from the
transverse section containing the transducer and first
winch.
WINCH 2WINCH 3
WINCH 1
(CD481 / GIF)
Figure 3
Rigging a vessel
for sphere
calibration
Each winch must be provided with a long spool of 0.60 mm
diameter monofilament nylon line, which is marked with small
swivels at 5 m intervals, beginning 10 m from the loose end.
The purpose of the swivels is threefold:
to unravel rotation of the nylon line
to mark distances on the line
to add weight so that the line sinks in water
Attaching the sphere
1 Locate the rope pulled beneath the hull before anchoring.
2 Use this rope to pull the line from the first winch beneath
the hull to the side with the second and third winches.
3 Attach the appropriate sphere, with affixed loop, to the
three suspension lines.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad ER60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad ER60 in the language / languages: English as an attachment in your email.

The manual is 3,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info