634490
8
Zoom out
Zoom in
Previous page
1/36
Next page
6
|
Radar system overview | Broadband 3G/4G™ Radar Installation Guide
Radar system overview
The Broadband Radar is a state of the art navigation aid. It provides outstanding radar
performance without the limitations of conventional pulse radars such as: dangerous
high power microwaves, standby warm up time, 30 m blind spot (mainbang), high power
consumption and large open arrays (which is what would be required to obtain the same
image quality at shorter ranges).
The Broadband 3G™ radar has an e ective range from 200 ft to 24 nm, whereas the Broadband
4G™ radar has an e ective range from 200 ft to 36 nm (target dependent).
The operating power consumption for the 3G is 18 W, with a stand-by power consumption of
2 W. The 4G operates on 20W, and has a standby consumption of 2.9W.
The system consists of: radar scanner, an interface box (not included with Lowrance 3G USA
model) and an interconnection cable. The scanner is housed in a dome of similar size to most
2 kW radars on the market.
The RI10 interface box is used to connect displays, power and heading information if MARPA or
chart overlay are required (Heading sensor not included). The RI10 has a SimNet (Simrad NMEA
2000) connector for heading input. The RI10 is included in all 4G kits.
The RI11 interface box is used to connect to earlier NX series displays using a serial connection.
A Y-cable may be used to add heading input for MARPA via NMEA0183.
The 3G kit may be ordered with either interface box, however the Lowrance USA model (000-
10418-001) is not shipped with an RI10 or RI11 interface.
1
3
2
4
6
5
7
1. Broadband Radar
2. Radar interconnection cable
3. Option heading sensor required for MARPA and chart overlay (not included)
4. RI10 or RI11 Radar interface box (not included in the Lowrance 3G USA model)
5. Ethernet cable: shipped with 1.8 m (6 ft)
6. Display: Simrad NSO, NSE or NSS / B&G Zeus / Lowrance HDS
7. SimNet or NMEA2000 data network (not included)
2
RADAR_3G_4G_IG_988-10113-003_EN_P.indd 6 2/11/2011 6:08:32 p.m.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad Broadband 4G Radar at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad Broadband 4G Radar in the language / languages: English as an attachment in your email.

The manual is 7,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info