634489
23
Zoom out
Zoom in
Previous page
1/36
Next page
|
21
Setup and Con guration | Broadband 3G/4G™ Radar Installation Guide
To start the radar:
From the radar screen select the Transmit button.
RI10 heading source selection:
The RI10 receives heading via SimNet or NMEA2000 network and transmits this data to the
radar, where MARPA processing is performed.
For Simrad installations with more than one SimNet heading source the RI10 will use the
Simrad group source. The source used by the Simrad group can be viewed or changed via an
NSE / NSO / NSS display in the Settings>Network>Sources… menu.
Dual Radar setup:
For B&G Zeus and Simrad NSO and NSE displays it is possible for two radars to be connected
to the network and viewed simultaneously on one display. At time of installation radar source
selection needs to be performed as described below.
1. Power up the system including both radars
2. On any display, the  rst radar ever detected by the display will be used as the source for all chart
and radar panels. This source will be used by default for every system power-up thereafter,
until changed
The radar source is identi ed by radar type with a four digit number and is displayed in the top
left corner of chart and radar panels:
Note: The four digit number is the last four digits of the radars serial number.
3. For a radar panel, the radar source can be changed in the Radar>Radar Options>Sources menu:
4. For a chart panel (with radar overlay on), the radar source can be changed in the Chart>Radar
Options>Sources menu:
5. For pages with more than one radar or chart panel, it is possible to set up di erent radar
sources for each panel
RADAR_3G_4G_IG_988-10113-003_EN_P.indd 21 2/11/2011 6:09:12 p.m.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad Broadband 3G Radar at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad Broadband 3G Radar in the language / languages: English as an attachment in your email.

The manual is 7,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info