634386
64
Zoom out
Zoom in
Previous page
1/72
Next page
64 |
System conguration | AP70/AP80 Operator Manual
Transition to HI work profile with
increasing speed: 10 kn
Transition speed set to 9 kn
Transition to LO work profile
with decreasing speed: 8 kn
HI work profile
LO work profile
Rang: OFF - 40 (kn)
Default: OFF
Thruster inhibit speed
This feature will block the thruster from running above a set vessel speed. It is a safety feature
to prevent, especially electrical on/off thrusters, from overheating if out of water or for
instance a planing boat or in rough weather.
When the speed exceed the set limit the truster indication will change as shown below.
Thruster(s) in use Thrusters unavailable when
speed exceed inhibit limit
¼ Note: The Thruster inhibit limit will only apply when speed source is Log or SOG, not if the
speed is set manually.
Rang: 1 - 40 (kn)
Default: 6 (kn)
Low speed limit
Sets the limit for the low vessel speed alarm.
An alarm occurs when the vessel’s speed goes below the selected limit.
Range: 1 - 20 (kn)
Default: 1 (kn)
Init rudder
Defines how the system moves the rudder when switching from power steering to an
automatic mode:
- Midships moves the rudder to zero position.
- Actual maintains the rudder offset, and use this as trim value (bumpless transfer)
¼ Note: Actual is only available with rudder feedback signal available.
Default: Midships
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad AP80 Autopilot at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad AP80 Autopilot in the language / languages: English as an attachment in your email.

The manual is 8,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Simrad AP80 Autopilot

Simrad AP80 Autopilot Additional guide - English - 18 pages

Simrad AP80 Autopilot Quick start guide - English - 6 pages

Simrad AP80 Autopilot User Manual - English - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info