39207
118
Zoom out
Zoom in
Previous page
1/126
Next page
Simrad AP20 Autopilot
116 20220505H
NMEA (hardware) test
Access the NMEA Test from the INSTALLATION Menu (see
page 82).
NMEA Test
Loopback NMEA1 OK
Loopback NMEA2 FAILED
On the Main PCB in the junction unit disconnect the cables and
connect TX1+ to RX1+ and TX1- to RX1-. Similar on the Power
PCB connect the NMEA ports the same way; TX2+ to RX2+
and TX2– to RX2– (not available on J3000X).
Select the NMEA test menu and verify that the hardware is OK.
If not, replace the corresponding PCB(s) to rectify.
Note ! With J3XX software version V1R5 the display readout will not
automatically reset to FAILED when you remove the TX/RX
straps. You will have to turn the equipment off and back on
again to reset.
118


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad AP20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad AP20 in the language / languages: English as an attachment in your email.

The manual is 2,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info