39207
106
Zoom out
Zoom in
Previous page
1/126
Next page
Simrad AP20 Autopilot
104 20220505H
Exit the Display Units menu by pressing STBD [>] button to
proceed to the Master Reset menu, or press STBY to return to
normal AP20 operation.
Master Reset
Language
Dockside
Interface
Seatrial
Parameters
NMEA Test
Display
Master Reset
SW V1R3
May 14 2002
09:38 0 00
No
Yes
Note ! A Master Reset is part of the final test at factory and will reset
the memories to factory settings. Unless you need to clear all
stored values during the installation setup procedure, you should
not perform a Master Reset. Master reset will also clear
compass calibration values stored, except for RFC35R Rate
compass where values are stored in the compass.
The Master Reset needs a double confirmation to prevent an
unwanted reset. To perform a Master Reset, rotate the course
knob clockwise and observe the display; then rotate the course
knob counter clockwise.
Exit the Installation Menu by pressing STBY to return to normal
AP20 operation.
Final sea trial
After having completed all settings in the Installation Menu, take
the boat out and perform a final sea trial in open waters with
sufficient distance to other traffic.
Steer the boat on all cardinal headings in AUTO mode.
Start with low and medium speeds to get familiar with the
response from the AP20.
Try the effect of LO and HI speed settings.
If the hardware for automatic HI/LO speed selection is
connected and configured, verify that the HI/LO transition is
occurring, and the HI/LO parameters are changing after the
106


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad AP20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad AP20 in the language / languages: English as an attachment in your email.

The manual is 2,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info