39207
88
Zoom out
Zoom in
Previous page
1/126
Next page
Simrad AP20 Autopilot
86 20220505H
Refer to the drive unit table on page 58 for information. It is not
possible to select a higher voltage than the input voltage. The
CLUTCH/BYPASS voltage is automatically set to the same as
the drive unit voltage. In Rudder Test, the AP20 system will
automatically detect whether the drive unit is a reversible motor
or solenoid operated.
Dockside
Boat type Planing
Drive unit voltage ---
Rudd feedb cal STBD ---
Rudd feedb cal PORT ---
Rudder test ---
--------- drive
Clutch ------
Transition speed 00kn
12V
24V
To change the voltage selection, rotate the course knob.
Note ! The drive unit voltage setting does not apply when operating
solenoids on a continuous running pump/steering gear. Hence,
the output voltage to the solenoids will be the same as the input
voltage.
Proceed to next menu item by pressing STBD [>] button.
Rudder Feedback Calibration
Make sure the RF300 is installed and aligned as pr. instruction in
section 4.6 (or eventually section 4.27 for LF3000). This
function enables you to compensate for any non-linearity in the
transmission between the rudder and the rudder feedback.
Dockside
Boat type Planing
Drive unit Voltage 12V
Rudd feedb cal STBD ---
Rudd feedb cal PORT ---
Rudder test ---
-------- drive
Clutch ------
Transition speed 00kn
No
Yes
Confirm by rotating the course knob clockwise.
88


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad AP20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad AP20 in the language / languages: English as an attachment in your email.

The manual is 2,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info