Manual Simpark Easymatic - Caravan Mover (page 20 of 27) (English, Dutch)

625961

Zoom out

Zoom in

1/27

Remove the protection covers from the pipes. Be carefull that dirt

doesnotenterthepipes.Thiswillcause

damage to the hydraulic system.

Be sure that the pipes are tted straight into the system.

Do not use any tools for mounting the pipes, light pressure is

enough to t the pipes into the system.

g. 11

Thepictureshowsclearlythattheoddnumbersarettedat

the top and the even numbers at the bottom of the distribution

block.Thepipesaremarked11-12-13and14.(See g. 12).

When the pump has been installed, you must check if the system

is not leaking. Connect the red + and the brown – cables of the

hydraulic pump on the battery. Connect the green or yellow cable

to the positive + pole of the battery to activate the pump unit.

Let the hydraulic pump run for a couple seconds this will bleed

the system automatically and to check if the pipes are not leaking.

g. 12

g. 10

To remove the transportation blocks, unscrew the bolts A as

shown on the picture (see g. 10), using the proper wrench.

Be sure no dirt is coming in the intakes. This may damage

the system. Turn the bolts out completely, to remove the

transportation blocks.

Check if the total system has been installed properly!



Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Simpark Easymatic - Caravan Mover in the language / languages: English, Dutch as an attachment in your email.

The manual is 3,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Simpark Easymatic - Caravan Mover Manual

Product: