566676
19
Zoom out
Zoom in
Previous page
1/27
Next page
Installation of the Easymatic version
4. HYDRAULIC SYSTEM
g. 7
The hydraulic pipes have to be tied up to the chassis and the
caravanoor.
Take care while bending the pipes. Be sure there are no kinks
in the pipes, this will damage the pipes (see g. 7).
Do not
kink
the pipes
Install the hydraulic pump in the middle of the cara-
van oor underside. Smear a small amount of glue on the
wooden multiplex plate (15x15 cms) and screw it against the
caravan oor underside, on the previously selected location. Fix
the hydraulic pump against the wooden plate.
Be sure that the hole in the pump cover is corresponding
with the pressure release valve on the pump. In case of a
malfunction, the pressure release valve can be operated
through this hole. Don’t exceed 1/4 of a turn of the pressure
release bolt. The pressure will be released and the drive
rollers can be pushed back from the tyres.
g. 8
Lead the pipes and the electric cables through the holes of the
pumpcoverandxthemagainstthecaravanoorunderside,freeof
moving suspension parts.
Be sure when closing the cover, that the pipes are free and
not squeezed or knicked.
g. 9
Electr.leads
Release valve
19
NL
UK
Release valve
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simpark Caravan Mover at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simpark Caravan Mover in the language / languages: English, Dutch as an attachment in your email.

The manual is 3,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info