Manual Silverline FLHK 800 ESK (page 26 of 32) (German)

784805

Zoom out

Zoom in

1/32

INSTALLATION INSTRUCTIONS

The installation must be performed by a qualified electrical contractor. This contractor will take

the entire responsibility of the installation. The installation has to comply with the legislation and

the standards in force in your country.

How to stick the gasket:

The gasket supplied with the hob prevents the intrusion of liquids into the cabinet below.

Its installation has to be done carefully, as described below.

Fitting - installing:

• Cut out sizes of the worktop:

Glass

Cutting

Rear

Side

Radiu

Shoulder

Shoulder depth.

520

780

490

750

526

786

• Ensure that there is a distance of 50 mm between the hob and the wall or sides.

• The hobs are classified as “Y” class for heat protection. Ideally the hob should be installed

with plenty of space on either side. There may be a wall at the rear and tall units or a wall

at one side. On the other side, however, no unit or divider must stand higher than

the hob.

• The piece of furniture or the support in which the hob is to be fitted, as well as the edges of

furniture, the laminate coatings and the glue used to fix them, must be able to resist

temperatures of up to 75 °C.

• The mural rods of edge must be heat-resisting.

• Not to install the hob to the top of a not ventilated oven or a dishwasher.

• To guarantee under the bottom of the hob casing a space of 20 mm to ensure a good air

circulation of the electronic device.

• If a drawer is placed under the work, avoid to put into this drawer flammable objects (for

example: sprays) or not heat-resistant objects.

• Materials which are often used to make worktops expand on contact with water. To protect

the cut out edge, apply a coat of varnish or special sealant. Particular care must be given

to applying the adhesive joint supplied with the hob to prevent any leakage into the

supporting furniture. This gasket guaranties a correct seal when used in conjunction with

smooth work top surfaces.

• The safety gap between the hob and the cooker hood placed above must respect the

indications of the hood manufacturer. In case of absence of instructions respect a distance

minimum of 760 mm.

• The connection cord should not be subjected, after building-in, to any mechanical

constraint (for instance constraint given by a drawer installed below).

Stick the gasket (2) two millimeters

from the external edge of the glass,

after removing the protection tape (3).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silverline FLHK 800 ESK in the language / languages: German as an attachment in your email.

The manual is 0.35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silverline FLHK 800 ESK Manual

Product: