780368
11
Zoom out
Zoom in
Previous page
1/21
Next page
20 21
silvercrossbaby.com
ENG FRA ITA SPA ZH-S RUS ENG FRA ITA SPA ZH-S RUS
Troubleshooting
Common Problems
For further advice:
contact the retailer where you purchased the infant carrier
Possible Solutions
Try dierent seating position
Adjust vehicle seat as far
back as possible
Position seat belt height
adjuster to the lowest
position (where tted)
Pull the seat belt tight
removing any slack
Try dierent seating position
Try dierent seating position
Try dierent seating position
Seat belt too short
Infant carrier unstable or too
upright due to shape of vehicle
seat.
IMPORTANT: Do not try
and alter the vehicle seat
shape. For example: lling
gaps, altering the angle of
infant carrier
Seat belt buckle too long,
cannot fully tighten lap section
of seat belt
Seat belt buckle is too far forward
Installing the Simplicity
Infant Carrier on a Silver
Cross travel system
The Simplicity Infant Carrier is
designed to t specied Silver
Cross pushchairs. Please refer to
your pushchair instructions.
Using the Simplicity Infant
Carrier as a rocking seat
Place the Simplicity Infant Carrier
on a level oor surface. Move the
handle making sure the handle
rmly clicks into the rocking
position (see page 8).
Your baby must be
harnessed into the infant
carrier and never left
unattended.
Using the Simplicity Infant
Carrier as a baby seat
Place the Simplicity Infant Carrier
on a level oor surface. Move the
handle making sure the handle
rmly clicks into the stable
position. You can now use the
Simplicity Infant Carrier as a baby
seat.
Your baby must be
harnessed into the infant
carrier and never left
unattended.
Looking after your
Simplicity Infant Carrier
Removing the covers
You must never use your
Simplicity Infant Carrier
without the manufacturers
cover. It is an important safety
feature of the infant carrier.
To remove the cover, open the
velcro fastening chest pads and
remove.
First remove the head support
cover by opening the two press
studs and remove the head
support cover from the plastic
insert.
To remove the cover, undo the
two press studs, undo the harness
buckle and then pull out the eight
connecting studs situated at
the sides of the cover. Slide the
harness and buckle through the
cutouts in the cover, pull the cover
over the sides of the infant carrier
and remove the cover.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for silvercrossbaby Simplicity Isofix Base at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of silvercrossbaby Simplicity Isofix Base in the language / languages: English, French, Italian, Spanish as an attachment in your email.

The manual is 2.94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info