780373
4
Zoom out
Zoom in
Previous page
1/33
Next page
6 7
silvercrossbaby.com
3.1
07
If your vehicle is equipped with Isofix
anchor points, these should be used to
obtain a more stable installaon.
These cars will have plasc elements that
guide the seats Isofix anchors into their
correct posions. If your vehicle does not
have these guide elements, you can use the
plasc guides provided with the car seat.
Cauon: When the seats of your car are
equipped with Isofix anchor points, install
your car seat using your vehicle’s ISOFIX
anchor points ALWAYS and ONLY in
combinaon with the cars safety belts. See
the vehicle list.
Match the back rest hook to the rear side
of base from lying posion to upright
posion, to make sure the back rest is fully
matched into the base.
1. Place the car seat in the appropriate
posion on the vehicle’s seat, facing in the
direcon of travel.
2. Rotate the adjuster buon in an-clock
wise direcon, and simultaneously pull the
isofix connectors outwards as far as it goes,
make sure it cannot be push backwards.
3. Posion the car seat facing forwards on
the vehicle seat with ISOFIX points.
4. Match the ISOFIX connectors to the
vehicle’s anchoring point unl hear a click”.
5. Rotate the adjuster buon in an-clock
wise direcon, and simultaneously push the
seat against the vehicle to eliminate the gap
between car seat and vehicle’s seat.
Use the isofix system if your vehicle's seat has addional isofix anchor
plasc guider
ATTENTION!
ISOFIX connectors are an addional fing system for securing the car seat and not suitable for
securing a child.
Child must always be secured by means of the cars three-point safety Belt.
07
If your vehicle is equipped with Isofix
anchor points, these should be used to
obtain a more stable installaon.
These cars will have plasc elements that
guide the seats Isofix anchors into their
correct posions. If your vehicle does not
have these guide elements, you can use the
plasc guides provided with the car seat.
Cauon: When the seats of your car are
equipped with Isofix anchor points, install
your car seat using your vehicle’s ISOFIX
anchor points ALWAYS and ONLY in
combinaon with the cars safety belts. See
the vehicle list.
Match the back rest hook to the rear side
of base from lying posion to upright
posion, to make sure the back rest is fully
matched into the base.
1. Place the car seat in the appropriate
posion on the vehicle’s seat, facing in the
direcon of travel.
2. Rotate the adjuster buon in an-clock
wise direcon, and simultaneously pull the
isofix connectors outwards as far as it goes,
make sure it cannot be push backwards.
3. Posion the car seat facing forwards on
the vehicle seat with ISOFIX points.
4. Match the ISOFIX connectors to the
vehicle’s anchoring point unl hear a click”.
5. Rotate the adjuster buon in an-clock
wise direcon, and simultaneously push the
seat against the vehicle to eliminate the gap
between car seat and vehicle’s seat.
Use the isofix system if your vehicle's seat has addional isofix anchor
plasc guider
ATTENTION!
ISOFIX connectors are an addional fing system for securing the car seat and not suitable for
securing a child.
Child must always be secured by means of the cars three-point safety Belt.
3.2
08
REMOVING THE CAR SEAT.
To remove the car seat, pull the grey buon
backwards on the Isofix anchors to release
the car seat from vehicle’s Isofix anchor
points.
ATTENTION!
If you have difficulty to release the Isofix
connectors. Try to give a bit more force to
the carseat against the vehicle’s seat and
simultaneously to pull the grey buon
backwards on the Isofix connectors to
release the carseat. This may help, if not,
please consult manufacturer or your retail
stores.
1. Place your child in the car seat and make
sure they are sing well back.
2. Thread the vehicle’s seat belt through
the belt guide under the headrest and the
belt guide under the armrest.
2. 1. Pass the diagonal secon of the seat
belt through the belt guide under the
headrest.
2. 2. Pass the lap secon of the seat belt
through the seat belt guide under the
armrest next to the seat belt buckle.
2. 3. Ensure that no part of the seat belt
has become twisted or trapped and that
the car seats fabric cover is not impeding
the movement or correct fing of the seat
belt.
Installing the child car seat
Securing your child in the car seat
08
REMOVING THE CAR SEAT.
To remove the car seat, pull the grey buon
backwards on the Isofix anchors to release
the car seat from vehicle’s Isofix anchor
points.
ATTENTION!
If you have difficulty to release the Isofix
connectors. Try to give a bit more force to
the carseat against the vehicle’s seat and
simultaneously to pull the grey buon
backwards on the Isofix connectors to
release the carseat. This may help, if not,
please consult manufacturer or your retail
stores.
1. Place your child in the car seat and make
sure they are sing well back.
2. Thread the vehicle’s seat belt through
the belt guide under the headrest and the
belt guide under the armrest.
2. 1. Pass the diagonal secon of the seat
belt through the belt guide under the
headrest.
2. 2. Pass the lap secon of the seat belt
through the seat belt guide under the
armrest next to the seat belt buckle.
2. 3. Ensure that no part of the seat belt
has become twisted or trapped and that
the car seats fabric cover is not impeding
the movement or correct fing of the seat
belt.
Installing the child car seat
Securing your child in the car seat
4.1
3.3
09
3. Ensure that the diagonal belt lies gently
on the child’s shoulder and the lap belt is
worn over the hips Tighten the diagonal
secon of the seat belt by pulling it
upwards unl there is no slack and the belt
holds the child firmly in place.
4. To take the child out of the seat, simply
unfasten the seat belt and undo the
shoulder belt guide.
To ensure the best protecon for
your child, the shoulder belt must
be guided so that it passes gently
over their shoulder You will need
to adjust this posion as the child
grows.
Installing the child car seat
Adjusng the headrest height
Checking the height of the shoulder belt
Too low Right posion Too high
09
3. Ensure that the diagonal belt lies gently
on the child’s shoulder and the lap belt is
worn over the hips Tighten the diagonal
secon of the seat belt by pulling it
upwards unl there is no slack and the belt
holds the child firmly in place.
4. To take the child out of the seat, simply
unfasten the seat belt and undo the
shoulder belt guide.
To ensure the best protecon for
your child, the shoulder belt must
be guided so that it passes gently
over their shoulder You will need
to adjust this posion as the child
grows.
Installing the child car seat
Adjusng the headrest height
Checking the height of the shoulder belt
Too low Right posion Too high
3.5
3.4
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for silvercrossbaby Discover at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of silvercrossbaby Discover in the language / languages: English, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 2.1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info