575359

Silvercrest Z31622B - IAN 100926 Manual

13
Zoom out
Zoom in
Previous page
1/84
Next page
13 GB/IE
=
= The scale is overloaded.
= Remove the overload.
=
= The batteries are too weak to weigh. You cannot operate
the scale.
= Replace the batteries (see section “Replacing the batteries”).
Note: This device has delicate electronic components.
Therefore interference may occur when it is near devices
which transmit radio signals.
If errors occur in the display, remove any such devices from
the vicinity of the product. In the case of such malfunctions,
remove the batteries briefly and then insert them again.
Cleaning and Maintenance
Do not use chemical cleaners, scouring agents or sharp
objects for cleaning. These can damage the product.
Never immerse the product in water or other liquids. This
can damage the product.
Clean the product with a slightly dampened, fluff-free cloth.
To remove more stubborn dirt, you can also dampen the
cloth with a weak soap solution.
Disposal
The packaging is made entirely of recyclable mate-
rials, which you may dispose of at local recycling
facilities.
Contact your local refuse disposal authority for more details
of how to dispose of your worn-out product.
2. Press the MODE button
3
once to change the weight unit
indicator (g / ml / lb’oz / fl’oz).
3. Place the substance to be weighed on the scale. The
weight of the substance being weighed is shown in the
LC display
1
.
Incremental weighing (Fig. A)
1. Follow steps 1 to 3 of the section on “Weighing” and
press the TARE button
2
. The LC display
1
shows 0
and the TARE symbol
10
appears.
2. Add another substance to be weighed to the scale. The
LC display
1
shows the weight of the newly added sub-
stance.
3. If you remove the added substance from the scale, the
LC display
1
shows 0.
4. If you remove all of the substances to be weighed from
the scale, the LC display shows a negative value
11
.
5. Press the TARE button
2
once and the TARE symbol
10
ceases to be displayed.
If there is no substance to be weighed on the scale and if 60
seconds elapses without a button being pressed or no movement
on the scale plate is noted, the scale switches automatically
into the time mode
5
.
Troubleshooting
= Fault
= Cause
= Solution
100926_silv_Digitale Kuechenwaage_Content_IE_FI_SE_DK_BE.indd 13 03.06.14 12:07
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest Z31622B - IAN 100926 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest Z31622B - IAN 100926 in the language / languages: English, German, Dutch, Danish, French, Swedish, Finnish as an attachment in your email.

The manual is 3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info