739816

Silvercrest Z30312A IAN 76061 Manual

5
Zoom out
Zoom in
Previous page
1/23
Next page
7 8
Operation
Press and keep pressed the REC button
3
at least 5 seconds.
The wall clock attempts to receive the DCF radio time signal. This
process takes a few minutes to complete.
Note: If the wall clock was not able to receive the DCF radio time
signal because of errors, e.g. due your location to being at too great
a distance from the transmitter or for other reasons, you can set the
time manually. The manually set value is overwritten as soon as
reception of the DCF radio time signal is successful.
Setting the time manually
Press and keep pressed the M.SET button
1
at least 3 seconds.
The wall clock switches into manual mode.
Press and keep pressed the M.SET button again until the hands
reach the correct position for you to set the time.
Briefly pressing the M.SET button moves the hands forward in
one minute steps to enable you to set the current time manually.
Note: After 8 seconds without pressing the M.SET button, the
wall clock switches out of manual mode and keeps the time as
normal. The manually set value is overwritten as soon as
reception of the DCF radio time signal is successful.
GB/IE
Preparing the product for use / Operation
Preparing the product for use
Remove the battery insulation strip from between the battery and
the contact.
Note: Reception may be considerably reduced by obstructions
(e.g. concrete walls) or sources of interference (e.g. other
electrical devices). In the event of reception problems, change
the position of the wall clock (e.g. to somewhere near a
window).
Radio Signal (DCF):
The DCF signal (time signal transmitter) consists of time pulses emitted
by one of the most accurate clocks in the world close to
Frankfurt / Main, Germany – this varies by 1 second in a million
years.
Your radio-controlled clock receives these signals under ideal
conditions up to a distance of approx. 1,500 km around
Frankfurt / Main. Reception of the radio signal generally takes approx.
3–10 minutes.
Operation
Receiving the DCF radio time signal
The wall clock automatically starts to search for the DCF radio time
signal. This process takes about 3–10 minutes to complete.
The reception of the DCF radio time signal by the wall clock can also
be started manually.
GB/IE
76061_12_Aur_Mod_A_B_GE_SE_DK_02.indb 7-8 7/17/12 11:16 AM
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest Z30312A IAN 76061 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest Z30312A IAN 76061 in the language / languages: English, Danish, Swedish as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest Z30312A IAN 76061

Silvercrest Z30312A IAN 76061 User Manual - German, Dutch, French, Italian - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info