739406

Silvercrest Z28414-RX IAN 69351 Manual

34
Zoom out
Zoom in
Previous page
1/46
Next page
36 GB/MT
Before getting started / Preparing for use
Note: The control unit must not be mounted
more than 1.5 m away from the scales. Other-
wise no infrared connection can be established.
3. Mark the selected position with a pencil.
4. Use a drill to drill a hole in the wall. Please comply
with the operating and safety instructions of the
drill.
5. Place the dowel into the hole.
6. Screw the screw into the dowel. Make sure that
the head of the screw sticks out of the wall by
5 - 7 mm.
7. Hang the control unit onto the wall using the
mounting device
12
.
Preparing for use
Setting the time
1. Press the time / confirmation button
7
down for
about 3 seconds to be able to set the hours.
Note: The hour display will flash.
2. Press the count-up button
8
or the count-down
button
9
to set the hours.
3. Press the time / confirmation button
7
to confirm
the entry and to be able to set the minutes.
Note: The minute display will flash.
4. Press the count-up button
8
or the count-down
button
9
to set the minutes.
5. Press the time / confirmation button
7
to confirm
your entry.
Setting the alarm
1. Press the alarm-setting button
8
twice to activate
the alarm and to display the alarm time.
Note: When the alarm is activated, the symbol
18
will appear in the LC display
11
.
2. Press the confirmation button
7
down for
about 3 seconds to be able to set the hours.
Note: The hour display will flash.
3. Press the count-up button
8
or the count-down
button
9
to set the hours.
4. Press the confirmation button
7
to confirm the
entry and to be able to set the minutes.
Note: The minute display will flash.
5. Press the count-up button
8
or the count-down
button
9
to set the minutes.
6. Press the confirmation button
7
to confirm the
entry.
7. Wait for about 30 seconds or press the confir-
mation button
7
again in order to get back to
time display.
8. Press the alarm-setting button
8
twice to
deactivate the alarm.
Note: When the alarm is deactivated, the
symbol
18
in the LC display
11
will go out.
The alarm time will go out.
9. Press the time / confirmation button
7
in order
to get back to time display.
Setting the unit of weight
Note: the legal weight unit is kg.
Note: You can choose to display the units of weight in
either kilogrammes or “stones and pounds” or pound.
Note: When the unit of weight is changed, the unit
of measurement for height also changes.
1. Pick the control unit up.
2. Make sure that the time is being displayed and
press the button to set the units of weight /
count-down button
9
.
3. Press the time / confirmation button
7
down
for about 3 seconds to be able to set the units
of weight you wish to have.
Note: The pictograms of the units of weight
20
,
21
will flash on the right-hand side of the
LC display
11
.
4. Press the count-up button
8
or the count-down
button
9
to set the unit of weight.
5. Press the time / confirmation button
7
to
confirm your entry.
6. Wait for about 30 seconds or press the time /
confirmation button
7
again in order to get
back to time display.
Entering personal details
1. Pick the control unit up and make sure that the
time is being displayed.
57179_silv_Koerperfettwaage_Content_LB5.indd 36 03.09.10 13:20
… 34 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest Z28414-RX IAN 69351 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest Z28414-RX IAN 69351 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest Z28414-RX IAN 69351

Silvercrest Z28414-RX IAN 69351 User Manual - German, Dutch, French, Italian - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info