566354
10
Zoom out
Zoom in
Previous page
1/41
Next page
SilverCrest USB 2.0 Video Grabber VG 2000 English
Connecting to your PC
In order to record using the Video Grabber you must first install the software. If
you haven't already done so, go to the chapter entitled 'Installing the software'
and follow the instructions.
Connect the adapter (7) to the Video Grabber (1) as shown in the earlier
illustration.
Attach the video output of your source (e.g. camcorder) to the Video
Grabber. Now you have the choice of the following types of connection:
Composite Video Signal
Connect one side of the video cable (number 3, yellow plug on both
cable ends) to the video input (yellow) of the connector adapter.
Connect the other side of the video cable (3) to a free video output of
your source (usually a yellow socket).
S-Video Signal
Connect one side of the S-Video cable (number 5, same plug on both
cable ends) to the S-Video input (black) of the connector adapter.
Connect the other side of the S-Video cable (5) to a free S-Video output
of your source.
Scart Adapter
When your source does not have a Video or S-Video output, you can use
the enclosed Scart Adapter (2).
Connect either the S-Video cable (number 5, same plug on both cable
ends) or the Video cable (number 3, yellow plug on both cable ends) to
the Scart Adapter.
Plug the Scart Adapter into a free Scart socket of your source.
Connect the audio output of your source to the Video Grabber. Use the
Audio adapter cable (4) with the red and white RCA plug.
Plug the Video Grabber's USB connector into a free USB 2.0 port, ensuring
your PC is switched on. Use the enclosed extension cable (6) if necessary
to extend the reach of the cable. If possible, ensure that the Video Grabber
is directly connected to your PC (not via a USB Hub). Only use the device
with a USB 2.0 port.
9
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest VG 2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest VG 2000 in the language / languages: English, Danish as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest VG 2000

Silvercrest VG 2000 User Manual - German, Dutch - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info