738911

Silvercrest SZW 400 A1 IAN 66929 Manual

38
Zoom out
Zoom in
Previous page
1/50
Next page
36
6.3 Cleaning the carameliser
Note: The carameliser 2 must be cleaned
carefully after each use. If the carameliser 2
is dirty it will not work properly.
1. Clean the carameliser 2 by hand in
warm water.
Caution! The carameliser 2 is not
dishwasher safe.
2. For stubborn encrustations leave it to
soak in warm water for about
20 30 minutes. You could add a few
drops of mild washing-up liquid.
Note: Water will accumulate in the
edges of the carameliser 2 during this
process. This must be removed before
the appliance can be used again.
3. Carefully shake out any water from the
carameliser 2.
4. Let the carameliser 2 dry thoroughly
before using the appliance again.
6.4 Cleaning accessories
Clean the splash guard 1, candyfloss bowl 6
and measuring spoon 11 by hand in the
sink.
The splash guard 1 and the candyfloss bowl
6 can also be cleaned in a dishwasher.
7. Faults and remedies
Water has entered the bottom section 9:
1. Remove the plug from the mains socket
immediately.
2. Turn the bottom section 9 over and leave
it to drain.
3. Have the appliance repaired by a
qualified specialist. The service address
can be found in “10. Warranty” on
page 37.
Sugar has entered the bottom section 9:
1. Remove the plug from the mains socket
immediately.
2. Allow the appliance to cool down.
3. Remove the carameliser 2.
4. Turn the bottom section 9 over and let
the sugar trickle out. Shake the
appliance gently if required.
5. If necessary, remove any sugar that has
burned onto the heating elements 5. Do
this carefully.
Caution! Never use abrasive, corrosive
or caustic cleaning materials or metal
objects to do this. These could damage
the heating elements 5.
The carameliser 2 is not turning:
Check that the carameliser 2 has been
inserted correctly (see “4. Unpacking and
setting up” on page 33).
No sugar strands are forming:
Clean the carameliser 2 thoroughly; it might
be jammed (see “6.3 Cleaning the
carameliser” on page 36).
The appliance has suddenly stopped
working:
Possibly the appliance has been in
operation for too long (see “2.1 Intended
purpose” on page 30) and the thermal cut-
out has triggered.
In this case, allow the appliance to cool
down completely, clean it (see “5.3 Thermal
cut-out” on page 35) and then use it again.
RP66929 ZuckerWG LB5 Seite 36 Freitag, 10. Juni 2011 2:22 14
… 38 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SZW 400 A1 IAN 66929 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SZW 400 A1 IAN 66929 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SZW 400 A1 IAN 66929

Silvercrest SZW 400 A1 IAN 66929 User Manual - German, Dutch, French, Italian - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info