Manual Silvercrest SZP 25 A1 - IAN 102538 (page 8 of 43) (English, German, Dutch, French, Swedish)

576644

Zoom out

Zoom in

1/43

- 5 -

Juice extraction

Note:

When pressing out juice, do not exceed the 600 ml

volume marking on the scale of the juice collector

1. Adjust the fruit pulp regulator

, by sliding it, so

that the slits in the fruit pulp sieve

lie

exactly above each other if you wish to have fru-

it juice with fruit pulp. Adjust the fruit pulp regula-

tor

, by sliding it, so that the slits in the fruit

pulp sieve

are not lying above each other

if you do not wish to have fruit juice with fruit pulp.

2. Cut the fruits in half (orange, lemon etc.)

3. Press the halved fruit lightly onto the squeezing

cone

. The appliance switches itself on

automatically as soon as the squeezing cone

is pressed down.

4. Apply pressure at various parts of the fruit rind

with your fingers. Thereby the juice will be even-

ly squeezed out of the fruit.

5. When no more juice flows from the fruit, stop

applying pressure to the squeezing cone

The appliance stops.

6. Press the squeezing cone

down repeated-

ly to loosen it, until it turns in the opposite

direction.

7. When no more juice flows from the fruit, stop

applying pressure to the squeezing cone

The appliance stops. Remove the fruit skin from

the squeezing cone

8. Continue similarly with further fruit-halves until

you have squeezed out the desired volume of

fruit juice. The current volume squeezed can be

read off from the scale on the side of the juice

collector

Emptying

Caution:

Remove the power plug from the wall socket when

you empty the fruit pulp sieve

or the juice

collector

. Otherwise there is a risk that the appli-

ance could start unintentionally.

• Turn the juice collector

anti-clock-wise until the

perceptible resistance desists. You can now lift it

from the drive axle

and pour the juice out.

Disassembly

If you wish to disassemble the Citrus Press, e.g. for

the cleaning of it, proceed as follows:

1. Remove the power plug from the wall socket

2. Remove the squeezing cone

3. Remove the fruit pulp sieve

Press the hook on the underside of the upper fruit

pulp sieve

inwards. At the same time exert

light pressure on the fruit pulp sieve

. The com-

ponents allow themselves to be pressed apart.

4. Turn the juice catchment container

anti-

clockwise until the perceptible resistance

diminishes. You can now lift it from the drive

axle

IB_102538_SZP25A1_SE_BE 07.07.2014 15:54 Uhr Seite 5

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SZP 25 A1 - IAN 102538 in the language / languages: English, German, Dutch, French, Swedish as an attachment in your email.

The manual is 0,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SZP 25 A1 - IAN 102538 Manual

Product: