Manual Silvercrest SWW 1500 A1 IAN 66900 (page 68 of 92) (English, Portuguese, Spanish)

738920

Zoom out

Zoom in

1/92

Handling and operation

SWW 1500 A1

Setting the nominal temperature

Press the button POWER/MODE ♦

and/or

repeatedly until, in the dis-

play , the nominal temperature and the indicator LOW blinks for 5 seconds.

Whilst the nominal temperature is blinking in the display ♦

press one of

the buttons +/-

and/or

to set the desired nominal temperature from

15°C to 27°C. Each press of the button +/-

and/or

increases or

reduces the nominal temperature by 1°C. Wait approx. 5 seconds until the

nominal temperature is continuously shown in the display . The setting is

now saved and the heating element

switches on.

Press the button POWER/MODE ♦

and/or

again if you want to set the

high heat output (HIGH). In the display the nominal temperature as well

as the indicator HIGH blink for 5 seconds.

NOTICE

As soon as the temperature at the temperature sensor integrated into the ►

device has reached the set nominal temperature the heating element

switches oﬀ and in the display the indicator HIGH and/or LOW blinks.

As soon as the temperature falls below the nominal temperature the ►

heating element

switches on again and in the display the indicator

HIGH and/or LOW lights up continuously.

Programming the switch oﬀ time

Beforehand, select the desired heating mode (HIGH or LOW) and, if desired, ♦

the nominal temperature (see Chapter “Heating operation” and “Setting the

nominal temperature”).

Press the button AUTO OFF ♦

and/or

. In the display appears the

indicator for automatic switch oﬀ AUTO OFF and the preset time blinks

for 5 seconds.

Whilst the preset time is blinking in the display ♦

press one of the buttons

+/-

and/or

to set the desired switch oﬀ time between 1 hour and

24 hours. As soon as the set heating mode (HIGH or LOW) or the set target

temperature is again indicated in the display , the setting has been accepted

and the appliance switches itself oﬀ with the lapse of the time period.

Press the button AUTO OFF ♦

and/or

again if you want to deactivate

the switch oﬀ time. In the display

the indicator AUTO OFF goes out.

Programming the switch on time

Activate the main switch POWER ♦

to switch the device on and to shift into

standby operation.

Press the button AUTO ON ♦

and/or

. In the display appears the

indicator for automatic switch on AUTO ON and the preset time blinks

for 5 seconds.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SWW 1500 A1 IAN 66900 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 1,16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SWW 1500 A1 IAN 66900

Silvercrest SWW 1500 A1 IAN 66900 User Manual - German, Dutch, French, Italian - 74 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SWW 1500 A1 IAN 66900 Manual

Product: