540178

Silvercrest SWR 300 A1 Manual

88
Zoom out
Zoom in
Previous page
1/112
Next page
SilverCrest SWR 300 A1
86 - English
Configuring the wireless repeater with the WPS function
This is the simplest way to configure the wireless repeater. First check if your router supports WPS.
For further details, please read your router's user manual. Then simply press the WPS button (5) on
the wireless repeater. The WPS LED (3) will now flash for approx. 2 minutes. During this period,
please activate the WPS function on your router. The wireless repeater will automatically connect to
your router and carry out the complete set-up. The wireless repeater can then be used. The wireless
repeater can now be accessed using the SSID and password of your router.
By using WPS, WDS (Wireless Distribution System) is activated as
standard as long as this is supported by your router.
Multiple Wireless Access Points can be connected
together using WDS (Wireless Distribution System) in order to
achieve larger network coverage.
It is possible to configure multiple repeaters. These should be
configured one after the other.
If your router does not support WPS, you can also configure the wireless repeater manually.
Configuring the wireless repeater manually using a LAN
connection
You can also configure the wireless repeater using a network cable. Connect the network cable to
the LAN socket (6) of the wireless repeater. Insert the other end of the network cable into a free
LAN socket on your computer.
The following describes the set-up in Windows
®
7. The settings in other operating systems may
differ. To be able to establish a connection to the wireless repeater, your computer must
automatically obtain the IP address. Proceed as follows:
Turn on your computer.
Click on Start | Control Panel | View network status and tasks | LAN
connection | Properties | Internet Protocol Version 4 (TCP/IPv4) | Properties.
Select Obtain an IP address automatically and click on OK.
Then close all opened windows.
… 88 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SWR 300 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SWR 300 A1 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info