737648
24
Zoom out
Zoom in
Previous page
1/31
Next page
- 22 -
Cleaning and Care
Danger
Do not open any part of the housing. There are no
operating elements inside. An open housing can create
the risk of a life-threatening electrical shock.
Never submerse any parts of the appliance in
water or other liquids! This can create the risk
of a life-threatening electrical shock if residual
liquid comes into contact with powered
components.
Before cleaning the appliance,...
first, remove the plug from the power socket and
allow the appliance to cool down completely.
Clean the exterior surfaces and the power cable
with a slighly damp cloth. Be sure to dry the
appliance well before taking it back into use.
For stainless steel surfaces, you can use appropriate
cleaning agents from a specialized dealer.
Never use any cleansers, abbrasive substances
or solvents. These can damage the appliance.
In the event of scale deposits
Before descaling, remove the pourer sieve 8
(see chapter "Removing/replacing the pourer
sieve").
Take any decalcifying agent used for kitchen
utensils (e.g. decalcifiers for coffee machines)
from a grocery shop. Proceed as detailed in the
instructions provided for the use of the decalcfying
agent.
Removing/replacing the pouring sieve
Open the lid 1.
Press from the front against the upper lug sitting
in the middle of the pouring sieve 8 and at the
same time hold it firmly by the flap.
Remove the pourer sieve 8.
Clean the pouring sieve 8 with a lightly moistened
dishcloth and under running water.
After cleaning it, place the pourer sieve 8 from
inside against the opening. Ensure that the lower
and the lateral lugs grip the opening. Press the
pourer sieve 8 until the upper lug engages in
the opening.
Should the scale deposits in the pourer sieve 8
be firmly settled, lay it in a water-vinegar solution,
with a ratio of 6:1, for a few hours. The scale
deposits will dissolve themselves. Rinse the pourer
sieve 8 with lots of clear water.
Storage
Allow the appliance to cool off completely before
putting it into storage.
Wind the power cable around the cable winder 5
under the base 4.
Store the appliance in a dry place.
IB_57454_SWKS2400A1_LB5 10.09.2010 11:39 Uhr Seite 22
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SWKS 2400 A1 IAN 57454 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SWKS 2400 A1 IAN 57454 in the language / languages: English, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SWKS 2400 A1 IAN 57454

Silvercrest SWKS 2400 A1 IAN 57454 User Manual - German, Dutch, French - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info