739735

Silvercrest SWC 100 A1 IAN 75375 Manual

32
Zoom out
Zoom in
Previous page
1/36
Next page
33 GB
Avoid damage to the heated
shawl / wrap!
Please ensure that you:
· Only connect the heated shawl / wrap to
the voltage indicated on the label,
· only use the heated shawl / wrap in conjunc-
tion with the control
1
indicated on the
heated shawl / wrap (label),
·
do not switch the heated shawl /
wrap on if it is folded or bunched
up,
·
do not squeeze or jam the heated shawl / wrap,
· do not cause any sharp creases in the heated
shawl / wrap,
· do not place any objects, e.g. suitcase or
washing basket, on the heated shawl /
wrap when it is switched on,
· do not place any source of heat e.g. a hot
water bottle or similar items onto the warp
when it is switched on.
Ignoring this advice may damage the heated
shawl / wrap.
Do not cover the control
1
and do not place
it on the heated shawl / wrap when the heated
shawl / wrap is in operation. The electronic
components in the control
1
of the heated
shawl / wrap cause the control
1
to heat up
slightly during operation.
Do not pull, twist or crease the cables. Ignor-
ing this advice may damage the heated
shawl / wrap.
Safety system
Note: the heated shawl / wrap is equipped with a
safety system. The electronic sensor technology
prevents the entire surface of the heated shawl /
wrap from overheating by automatically switching
off in the event of a fault.
If the safety system switches the heated shawl /
wrap off automatically as a result of a fault, the
function display on the control
1
will no longer
light up, even when heated shawl / wrap is
switched on.
Please note that, for safety reasons, the heated
shawl / wrap must not be used after a fault and
must be returned to the service address
indicated.
Preparing the product for use
Note: The heated shawl / wrap may smell of plas-
tic the first time you use it, but this will disappear af-
ter a short period of time.
Lay the heated shawl / wrap over your shoul-
ders in such a way that the dark side is facing
your body.
If necessary, fasten the press studs
4
on the
front side (fig. B). There are additional press
studs
5
in the arm region (fig. B).
To begin, first connect the control
1
to the
warp with the plug-in connector
3
(see fig. C).
Switching on / off /
Selecting the temperature
Switching on:
Set Level 1, 2, 3, 4, 5 or 6 on the control
1
to
switch the heated shawl / wrap on.
Note: The function indicator
2
illuminates
after the heated shawl / wrap is switched on.
Switching off:
Set Level 0 on the control
1
to switch the
heated shawl / wrap off.
Note: The function indicator
2
ceases to
illuminate.
Selecting the temperature:
Just before using the heated shawl / wrap, set it
to the highest temperature setting (level 6). This
will cause the heated shawl / wrap to warm up
quickly.
If you wish to leave the heated shawl / wrap
on for several hours, set the lowest temperature
(level 1).
Important safety instructions / Safety system / Preparing the product for use
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SWC 100 A1 IAN 75375 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SWC 100 A1 IAN 75375 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info