754153
23
Zoom out
Zoom in
Previous page
1/77
Next page
22 GB/IE
Assembly
Fig. Step
A
NOTE: The following parts are for
transport only. After unpacking, remove
and discard these parts.
Security tube (located on the shaft of the
main unit
16
)
Security plug (located between rear grille
2 and blade 4)
Unscrew the L-shaped bolt
10
. Remove the
washer 9 from the stand post
12
. Place
the stand post
12
on the round base
11
.
Fasten both parts with the washer 9 and the
L-shaped bolt
10
.
B
Extend the upper pole
14
to its maximum
length (refer to “Height adjustment”). Place
the main unit
16
on the upper pole
14
. Fasten
both parts with the locking knob
15
.
C
Remove the blade lock nut 5 from the shaft
of the main unit
16
, grille lock nut 3 from the
main unit
16
. Remove the security plug from
the rear grille 2. Place the rear grille 2 on
the main unit
16
. Make sure to align the rear
grille's 2 round holes over the 3 mounting
lugs on the main unit
16
. Secure the grille with
the grille lock nut 3. Rotation direction: .
D
Place the blade 4 on the shaft of the main
unit
16
. Secure it with the blade lock nut 5.
Rotation direction: .
E
NOTE: Make sure the 8 positions of the
grille collar 7 properly click into place at
the edge of the front grille 6.
Unscrew the locking screw from the hinged
clip 8. Place the front grille 6 on the rear
grille 2. The hook of the grille collar 7 needs
to be hooked into the rear grille 2.
F
Secure both grilles 2 / 6 by closing the
hinged clip 8. Secure the locking screw onto
the hinged clip 8.
Height adjustment
Loosen up the adjustment knob13 in anti-
clockwise direction (see Fig. F).
Adjust the length of the upper pole 14.
When the height is set, secure the position by
tightening the adjustment knob13 in clockwise
direction (see Fig. F).
Operation
Place the product on a flat, stable ground.
Connect the power plug to a suitable power
socket.
Turning the product on/off: Press
23
.
Fan speed
Press
21
repeatedly to toggle between the
6 fan speeds:
Display Function
1Lowest speed
6Highest speed
Oscillation
When the product is on, press
20
to toggle
between different oscillation modes:
Press
Indicator
Function
1x
17
Horizontal oscillation.
2x
18
Vertical oscillation.
3x
19
Vertical / horizontal
oscillation.
4x Oscillation stops.
NOTES:
You can also adjust the angle of the product
manually by pulling it lightly up / down
(see Fig. G).
Do not adjust the angle when the product is in
operation.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SV 60 A1 - IAN 297649 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SV 60 A1 - IAN 297649 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 9,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info