679218
16
Zoom out
Zoom in
Previous page
1/107
Next page
13
SUP 128 A1
GB
IE
Setting the anti-skating force
Due to the friction between the rotating disc and the stylus , the pickup arm
is pulled inwards and the stylus presses more heavily on the inner fl ank of the
groove on the record. This is compensated for by the anti-skating setting.
The anti-skating force should be set to the same value as the tracking pressure,
e.g. a value between 4–6.
Set the anti-skating control to the same value as the pickup arm counter-
weight
.
Electrical connection
Before connecting the device, compare the connection data (voltage and
frequency) on the rating plate with that of your mains power supply.
This data must correspond in order to avoid damaging the product.
Make sure that the power cable is not damaged and is not routed over
hot surfaces and/or sharp edges.
Ensure that the power cable is not taut or kinked.
The mains power socket must be easily accessible so that the power cable
can be quickly disconnected in an emergency.
Inserting/changing the remote control battery
Open the battery compartment on the rear of the remote control .
Insert 2 new type AAA batteries into the battery compartment.
Close and secure the battery compartment.
Connection to an external amplifi er
NOTE
The record player is equipped with a LINE OUT output . The record
player must be connected to a sound output device with speakers and
volume control, e.g. an amplifi er.
Connect a stereo cinch cable to the LINE OUT connectors on the record
player and connect these to the AUX IN connectors of your external amplifi er.
Follow the operating instructions for the external amplifi er when doing this.
CAUTION
Potential damage to external amplifi er!
Do not connect the LINE OUT output of the record player to the PHONO
input of your amplifi er. Due to the internal amplifi cation of this special input,
it can be destroyed by connecting the record player
IB_60308_SUP128A1_LB3.indb 13 08.04.14 09:32
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SUP 128 A1 - IAN 60308 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SUP 128 A1 - IAN 60308 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info