Manual Silvercrest SUP 128 A1 - IAN 60308 (page 15 of 107) (English, German, Dutch, French)

679218

Zoom out

Zoom in

1/107

SUP 128 A1

Before initial start-up

Setting the tracking pressure

The supplied counterweight must be ﬁ tted to the pickup arm . This is used

to set the correct weight so that the stylus

moves over the records without

jumping or pressing too ﬁ rmly into the groove.

CAUTION

Possible stylus damage.

► Hold the pickup arm ﬁ rmly so that the stylus is not touching the turntable .

♦ Remove the protective cap from the stylus.

♦ Release the arm rest clip from the pickup arm.

♦ Set the anti-skating control to "0".

♦ Slide the counterweight (with the scale at the front) onto the pickup arm

from the rear all the way to the front (see Fig. A).

♦ Rotate the counterweight clockwise on the pickup arm until you reach the

white stop mark (T) on the pickup arm (see Fig. B).

♦ Set the scale ring to "1" without changing the weight. To do this, hold the

silver part of the counterweight ﬁ rmly and rotate the front black scale ring

only (see Fig C).

♦ Now set the tracking pressure by rotating the counterweight anticlockwise.

We recommend a value between 4–6 (see Fig. D).

Fig. A Fig. B Fig. C Fig. D

NOTE

►

If in doubt, start by selecting a lower weight for the stylus. If the stylus still

jumps, increase the weight in small increments. Too much weight will make

the needle cut into the groove, causing excessive wear.

IB_60308_SUP128A1_LB3.indb 12 08.04.14 09:32

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SUP 128 A1 - IAN 60308 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SUP 128 A1 - IAN 60308 Manual

Product: