575402
9
Zoom out
Zoom in
Previous page
1/43
Next page
6
STYG 2000 A1
GB
IE
Assembly and setting up
WARNING! RISK OF FIRE!
Never place the appliance underneath wall
cupboards or next to curtains, cupboard
walls or other fl ammable objects.
Place the appliance only on a heat-resistant
surface.
1) Take all the parts out of the box and remove
the packaging material and any protective
wrapping.
2) Clean all of the components as described in
the section “Cleaning and care”. Ensure that
all parts are completely dry.
3) Place the appliance on a heat-resistant, clean
and level surface. Ensure that you do not
place the appliance directly next to a wall or
a cupboard.
4) Push the fat drip tray 3 into the guide rails on
the underside of the appliance.
5) Push the thermostat 5 into the socket 1 on
the appliance. Ensure that the temperature
regulator 7 is always set to “0” before you
connect the thermostat to the socket 1.
6) Insert the plug into a mains power socket.
Before fi rst use
1) Grease the griddle 4 lightly with butter,
margarine or oil which is suitable for baking/
grilling. This allows any cooking residues on
the griddle 4 to be more easily removed.
2) Set the thermostat 5 to level 5 and allow
the appliance to heat up for 5 minutes.
3) After 5 minutes,turn the temperature regulator 7
back to level 0.
4) Then disconnect the plug and allow the appli-
ance to cool down.
NOTE
The fi rst time the appliance heats up a small
amount of smoke and smell may be gener-
ated, caused by production residues. This
is completely normal and is not dangerous.
Ensure suffi cient ventilation; for example,
open a window.
5) Wipe the griddle 4 with a moist cloth. Ensure
that all parts are completely dry before operating
the appliance.
The appliance is now ready for use.
Thermostat settings
Level 0: Grill switched off
Level 0 - 1: grill switched on;
low temperature
Level 1 - 3: grill switched on; medium
temperature (e.g. vegetables)
Level 3 - 5: grill switched on;
high temperature (e.g. meat)
Operation
WARNING!
THERE IS A RISK OF INJURY!
Once the appliance is in operation, touch
it only using the handles or the temperature
regulator 7. There is a risk of burns!
Once the fat drip tray 3 has been pushed in, the
thermostat 5 has been connected to the socket 1
and the mains plug has been connected to the
power supply:
1) Adjust the temperature regulator 7 to the de-
sired temperature level. The indicator lamp 6
illuminates. When the set temperature has been
reached, the temperature indicator lamp 6
goes out.
IB_90973_STYG2000A1_BE.indb 6 09.07.13 16:58
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest STYG 2000 A1 - IAN 90973 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest STYG 2000 A1 - IAN 90973 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info