738693
28
Zoom out
Zoom in
Previous page
1/41
Next page
- 26 -
ELECTRIC TEA MAKER
Intended Usage
This appliance is intended for brewing tea and then
keeping it warm. This appliance is intended for do-
mestic use only, it is not suitable for commercial or
industrial applications.
Safety information
To avoid potentially fatal injury through
electric shock:
Ensure that the base with the electrical connections
does not come into contact with water! Ensure that
the base is completely dry before use, especially
if it has accidentally become wet.
Use the appliance only with the supplied base.
Ensure that the power cable never becomes wet
or damp during operation. Lay the cable so that
it cannot be trapped or otherwise damaged.
To avoid potentially fatal risks, arrange for a de-
fective power plug and/or cable to be replaced
at once by qualified technicians or our Customer
Service Department.
Always remove the plug from the mains power
socket after use. Simply switching the appliance
off is not sufficient, as the appliance is under
power for as long as the plug is connected to
the socket.
To avoid burns and other injuries:
Always heat the water with a closed lid, otherwise
the automatic cut-out may not work. Boiling water
can then spray out over the edge.
Hot steam clouds may be released. The glass
pot also becomes very hot during use. Wear
oven mitts.
Make certain that the appliance stands firmly
and vertically before switching it on.
Boiling water can cause an instable kettle to fall
over.
Exercise caution with the glass pot. Broken glass
can cause serious cut wounds.
Never fill it with more water than to the MAX
marking. If you do, boiling water may spray out
and lead to scalds.
This appliance is not intended for use by individuals
(including children) with restricted physical, physio-
logical or intellectual abilities or deficiences in
experience and/or knowledge unless they are
supervised by a person responsible for their
safety or receive from this person instruction in
how the appliance is to be used.
Children should be supervised to ensure that
they do not play with the appliance.
Do not use an external timing switch or a separate
remote control system to operate the appliance.
You can thus prevent the appliance from
being damaged:
Under no circumstances should you fill the ap-
pliance with cold water immediately after a brewing
process. It could form stresses in the glass, causing
it to break!
IB_66500_STK650A1_LB5 31.05.2011 10:14 Uhr Seite 26
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest STK 650 A1 IAN 66500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest STK 650 A1 IAN 66500 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest STK 650 A1 IAN 66500

Silvercrest STK 650 A1 IAN 66500 User Manual - Dutch, French, Italian - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info