Manual Silvercrest SSTB 10 A1 - IAN 103140 (page 29 of 40) (English, German)

576673

Zoom out

Zoom in

1/40

SSTB 10 A1

Set-up location requirements

For safe and trouble-free operation of the device , the set-up location must fulﬁ l

the following requirements:

■ Place the device on a ﬁ rm, ﬂ at and level surface.

■ Do not place the device in a hot, wet or extremely damp environment or in

the vicinit

y of ﬂ ammable materials.

■ Keep a minimum distance of 30 cm to heat-emitting devices such as heaters,

vens, etc.

■ Only operate the device in locations with adequate ventilation.

Electrical connection

■ Before you connect the device, compare the connection data (voltage and

frequency) on the mains adapter type plate with that of the intended power

source. These data must agree so that no damage is sustained by the device.

■ Make sure that the mains adapter's connection cable is not damaged and is

not laying o

ver hot surfaces and/or sharp edges.

■ Connect the plug of the connecting cable into the connector for the power

supply on the rear of the unit and plug the mains adapter into a power

outlet. Ensure that the power cable is not stretched tightly or kinked.

■ Place the connecting cable such that no one can stumble over it.

■ Do not place the device, furniture or any other objects on the cable. Do not

kink the cable or knot it and do not connect it to other cables. Ne

ver wrap

the cable tightly around other objects otherwise the conductors inside the

cable could break and cause a malfunction.

Inserting/changing the remote control batteries

NOTE

► The supplied battery (Type CR2025) is already installed in the remote control

when deliv

ered. Before use remove the isolation strip from the battery

compartment.

For replacement with a new battery proceed as follows:

♦ Pull the battery compartment out of the remote control by pressing the lateral

ocking device and at the same time pull the battery compartment out.

♦ Remove the depleted battery and insert a new battery of the type CR2025

(button cell) into the battery compartment. Be sure to insert the battery with

the correct polarity.

♦ Slide the battery compartment back into the remote control until it locks into

place.

Mains adapter QXS24C-120200

Does anyone know if it's possible to get this as a USB adaptor as opposed to a mains adaptor? So I could connect it to my TV for automatic turning on? Submitted on 23-10-2020 at 20:10
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SSTB 10 A1 - IAN 103140 in the language / languages: English, German as an attachment in your email.

The manual is 0,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SSTB 10 A1 - IAN 103140 Manual

Product: