737630

Silvercrest SST 50 A1 IAN 53143 Manual

13
Zoom out
Zoom in
Previous page
1/18
Next page
11
GB
the first station with a sufficiently
strong signal.
Storing a station
You can store up to 20 FM Stations.
1. Select the desired station.
2. Press 38 / MEM 26. A preset number,
e.g. 02 appears in the display.
3. Briefly and repeatedly press /
set 25 / /set 36 to change the
preset number. The preset numbers
are shown in the display.
4. Store the station by pressing 38 /
MEM 26 again.
5. Repeat steps 1 to 4 to store more sta-
tions.
Accessing stored stations
• Remote control: press /set 25 /
/set 36.
• On the device: briefly press SET /
M
15 or SET / M+ 16.
9. Clock
9.1 Setting the clock
TIP:
• If no button is pressed in setting mode
for about 5 seconds, the function is
cancelled.
• The time is displayed in 24-hour for-
mat.
• After a power failure you will need to
reset the clock and alarm time.
To set the time, the device needs to be
switched on at the power switch
(POWER 6 on ON).
1. To switch the device to standby mode,
if necessary, press ON/STANDBY 11.
2. Press TIME SET 12 on the device.
The hours symbol flashes.
3. Press ¢ UP 20 or 4 DOWN 21 to
set the hours and then press TIME
SET 12. The minutes symbol flashes.
4. Now press ¢ UP 20 or 4
DOWN 21 to set the minutes.
5. Press TIME SET 12 to finish inputting
the time.
9.2 Alarm function (alarm
clock)
TIP:
• The time needs to be set correctly be-
fore an alarm can be set.
• If you do not press any button for
about 5 seconds, the function is can-
celled.
• If you wish to wake up to music from
your iPod, it must be inserted in the
dock 1.
Setting the alarm clock
To set the alarm, the device must be
switched to standby mode with ON/
STAND-BY 40.
1. Press /set 36 for about 2 sec-
onds. The symbol for Alarm1 and
the hours symbol flash in the display.
2. Press 4 1 38 or 33 ¢ 28 to
set the hours and then press /
set 36. The minutes symbol flashes.
3. Now press 4 1 38 or
33 ¢ 28 to set the minutes.
4. Press /set 36 to finish inputting
the alarm time.
5. Set the way in which you wish to be
awoken. Briefly and repeatedly press
/set 36 to be awoken by an
alarm tone , iPod or the
radio .
TIP:
• Select the track you wish to wake up
to on the iPod.
• The radio will wake you with the last
selected station.
• When inputting the time, press and
hold 4 1 38 or 33 ¢ 28 to
fast forward/back.
__DT53143_B6.book Seite 11 Dienstag, 24. August 2010 5:14 17
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SST 50 A1 IAN 53143 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SST 50 A1 IAN 53143 in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SST 50 A1 IAN 53143

Silvercrest SST 50 A1 IAN 53143 User Manual - German, Dutch, French, Italian - 66 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info