737630

Silvercrest SST 50 A1 IAN 53143 Manual

10
Zoom out
Zoom in
Previous page
1/18
Next page
8
GB
6. Operation
6.1 Basic operation
As a rule, the instructions describe opera-
tion with the remote control. You can also
use the buttons on the device to perform
the basic functions.
Switching the device on/off
1. Turn the power switch POWER 6 to
ON.
2. Press ON/STANDBY 11 on the device
or ON/STAND-BY 40 on the re-
mote control. The device starts with
the last selected settings (mode, sta-
tion and volume) and the brightest dis-
play lighting.
3. Press ON/STANDBY 11 on the device
or ON/STAND-BY 40 on the re-
mote control again to switch the de-
vice to standby mode.
The device remains in standby mode even
after it is switched off. Since the device
continues to use a little power in this mode,
switch off the device using the power
switch POWER 6 (OFF) if you are not us-
ing it for a prolonged period. You will then
need to reset the clock and alarm time as
well as any stored radio stations and
sound settings.
Selecting mode
With the device switched on, press
MODE 39 to choose between the various
modes. The following appears in the dis-
play:
- iPOD: iPod
-
AUX: Device connected via AUX
IN 9
- RADIO: Radio
Display lighting
Choose between three brightness levels
for the display.
•Press SNOOZE/DIMMER 30 to
change the display lighting. This will
not work if the alarm clock is currently
sounding.
Switching off with SLEEP
You can use the sleep function to specify a
time after which the device is to switch off.
1. Press SLEEP 34. A switch-off interval
flashes in the display.
2. Press SLEEP 34 repeatedly to specify
the switch-off interval (in minutes):
120, 90, 60, 45, 30, 15, 10, 05, 00
(off).
3. Once the switch-off interval has been
specified SLEEP appears in the dis-
play.
6.2 Sound settings
Volume
• Set the required volume with VOL +/
18 on the device or with VOLUME +/
31 on the remote control. The setting
is displayed (VOL 00
30) and stored
until the device is switched off at the
power switch POWER 6.
Muting
•Press 24 on the remote control to
switch the sound on and off.
Tone controls
Set the required tone with BASS +/
33
and TREBLE +/
32 on the remote control.
The setting is displayed (TREB, BASS: -05
to +05) and stored until the device is
switched off at the power switch
POWER 6.
__DT53143_B6.book Seite 8 Dienstag, 24. August 2010 5:14 17
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SST 50 A1 IAN 53143 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SST 50 A1 IAN 53143 in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SST 50 A1 IAN 53143

Silvercrest SST 50 A1 IAN 53143 User Manual - German, Dutch, French, Italian - 66 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info