773468

Silvercrest SST 100 A1 - IAN 293926 Manual

31
Zoom out
Zoom in
Previous page
1/78
Next page
GB/IE 31
• It is necessary to repair the product if it has
been damaged in any way, for example, if the
housing is damaged, if liquid or objects have
penetrated the device or if the product has
been exposed to rain or moisture.
• Repair work is also required if the device is
not working properly or has been dropped.
If smoke is produced, or there are any
unusual sounds or smells, turn the product off
immediately. In such cases, the product should
not be used until they have been inspected by
authorised service personnel. Only have the
device repaired by qualified personnel. Never
open the housing of the product.
• Only use a clean, dry cloth for cleaning the
product and never use any corrosive liquids.
Use a slightly moistened cloth and a mild
cleaning agent to remove stubborn dirt.
Troubleshooting
To keep the warranty valid, never try to repair the
system yourself. If you encounter problems when
using this unit, check the following points before
requesting service.
No power
• Ensure that the AC cord of the apparatus is
connected properly.
• Ensure that there is power at the AC outlet.
• Press the standby button to turn the unit on.
Remote control does not work
• Before you press any playback control button,
first select the correct source.
• Reduce the distance between the remote
control and the unit.
• Insert the battery with its polarities (+/-)
aligned correctly.
• Replace the battery.
• Aim the remote control directly at the sensor on
the front of the unit.
Clock setting erased
• Power has been interrupted or the power cord
has been disconnected.
• Reset the clock.
Tuning in a station
Press and hold the / buttons on the remote
control, the frequency changes down or up
automatically until a station is found.
Note:
The search may not stop at a station with a very
weak signal.
Press the / buttons on the remote control
repeatedly until you find the station you want.
Each press of the / buttons will adjust the
frequency by 0.1 MHz. If reception is still poor, try
to move the radio to another location.
Presetting stations manually
You can preset up to 20 FM stations.
1. Tune in the desired station, then press the
PROG button on the remote control.
2. Press the PRE-/PRE+ buttons on the remote
control to select the preset number.
3. Press the PROG button on the remote control
to store the station.
4. Repeat above steps 1 to 3 for each station
you want to store in memory with a preset
number.
Storage when not in use
Store the unit in a dry location to protect it from
dust and direct sunlight.
Cleaning
• Switch the product off, remove all plugs before
cleaning!
• No acid, chafing or solvent cleaning agents
should be used or the product can be
damaged.
• Only clean the outside of the product using a
soft, dry cloth!
• For persistent soiling, a mild cleaning agent
can be used.
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SST 100 A1 - IAN 293926 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SST 100 A1 - IAN 293926 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3.9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info