738649
147
Zoom out
Zoom in
Previous page
1/151
Next page
Digital SD Sat Receiver SSR 576 A1
English - 33
Appendix
Troubleshooting
No signal
No signal is shown on the device nor on the OSD menu signal
indicators.
1. First check the antenna cable: The braided lead of the external
wire and the aluminium film must have good contact with the F
connector and must not touch the inner (centre) wire!
2. Check the reception settings and edit them, if necessary. To
further locate the problem we recommend that you temporarily
connect the LNB directly to the receiver and do not use any
switches or splitters.
Functional fault
1. The device shows the wrong broadcasting times in the EPG or
shows the wrong time. Once powered on, the satellite receiver
needs to read and process the channel data. Depending on the
transponder, this can take some time. Sometimes it may be
necessary to re-open the EPG or to switch the channel.
2. The device fails to respond. Unplug the power cord (21) or switch
the device off by using the main power switch (22). Wait several
seconds and reconnect the device to try again.
Small number of channels
1. Make sure that you have enabled the correct Channel List. To do
this, press the FAV [Yellow] button (44). Press P+ (28) or P- (30)
to select the desired channel list and press the OK button (40) to
confirm. To obtain the complete channel list, select <none>.
2. The antenna has been moved to the wrong satellite. When
positioning the antenna you may receive satellite broadcasting on
similar frequencies thereby causing the signal indicators of your
satellite receiver to increase. When switching channel suddenly
foreign channels or the message "No Signal!" appear. Normally it
is sufficient to move the antenna a few degrees to the East or
West in order to receive the desired channels.
No sound, distorted sound
1. If no sound or only interference can be heard, your TV set or AV
receiver may not be capable of decoding Dolby Digital/AC3 audio
via the HDMI port. Solution: Press the [Blue] button (43) to select
Stereo sound. If the channel does not offer any stereo sound,
connect the digital coaxial S/PDIF audio output (13) or the optical
S/PDIF output (14) to your Surround/AC3/Dolby Digital sound
system.
2. If no sound can be heard, check if the MUTE function has been
enabled. If the sound is muted, press the
button (35) again to
resume the sound output.
3. If the sound is very low or there is no sound at all, double-check
the volume setting and, if necessary, increase the volume via the
+ button (41). Please also check the volume setting on your TV
set or your Hifi amplifier, if connected.
147


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SSR 576 A1 IAN 64328 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SSR 576 A1 IAN 64328 in the language / languages: English, German, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 7,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SSR 576 A1 IAN 64328

Silvercrest SSR 576 A1 IAN 64328 User Manual - Dutch, French - 79 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info