738646
43
Zoom out
Zoom in
Previous page
1/53
Next page
Digital HD Satellite Receiver SSR 1080 A1
English - 41
Daily Use
Powering the Device On/Off
Power the satellite receiver on by pressing the power button (1) on the device and then by pressing
the On/Standby button (18) on the remote control. Pressing the On/Standby button (18) again will
power the device back off. In this case the device switches to standby mode.
Selecting Channels
Using the Channel Up/Down Buttons
Press the navigation buttons S or T (23) on the remote control to skip to the previous or next
channel.
Using the Numeric Buttons
Enter the desired channel number by using the numeric buttons (19).
Using the Program List
Press the OK button (34) to open the Program List. You can highlight the desired channel via the
S or T navigation buttons (23). Press the OK button (34) to switch to the highlighted channel.
Press the PG-/PG+ (35) to scroll through the channel list down or upwards. Press the FAVOR
button (31) to open the list of your favourite channels.
Adjusting the Volume
Press the W or X navigation buttons (23) to adjust the volume of your digital receiver. Press the
MUTE button (29) to mute or to restore the sound output
Helpful Special Functions
Press the TEXT button (32) to launch the Teletext view. Press the EPG button (24) to open the
Electronic Programme Guide. If subtitles are available, press the SUB-T button (21) to show the
subtitles. Press the TV/RADIO button (20) to toggle between TV and radio channels.
Info Button
The INFO button (25) lets you display information about the current programme. Press this button
once to show information about the current and next programme. Press this button twice to show
advanced information about the current programme, and press it three times to show information
about the currently tuned-in frequency.
If you have a USB storage device connected and you have Timeshift enabled, pressing the INFO
button (25) the first time will display the Timeshift status. The on-screen bar shows the current
playback position since the time you switched to the current channel. You can then press the W or
X navigation buttons (23) to go to any position on the blue bar and then press the OK button (34) to
start playback from this position. Pressing the INFO button (25) twice displays the list of existing
recordings. Press the S or T navigation buttons (23) to select the desired recording. Press the OK
button (34) to play the selected recording.
One-Touch Recording
If you have connected a USB storage device you can press the REC button (38) to start recording
at any time. Press the REC button (38) again to stop recording (if the information is not visible any
more, press the REC button twice). Press the REC button (38) multiple times to change the
recording time. It is also possible to enter the recording time directly via the numeric buttons (19),.
The default value is 2 hours.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SSR 1080 A1 IAN 61193 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SSR 1080 A1 IAN 61193 in the language / languages: English as an attachment in your email.

The manual is 8,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SSR 1080 A1 IAN 61193

Silvercrest SSR 1080 A1 IAN 61193 User Manual - German, Dutch, French, Italian - 201 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info