738646

Silvercrest SSR 1080 A1 IAN 61193 Manual

24
Zoom out
Zoom in
Previous page
1/53
Next page
Digital HD Satellite Receiver SSR 1080 A1
English - 22
Motor Setting
Satellite
Select the desired satellite to set up your motor-driven
antenna. Note: If no satellites appear at this point, you can
add them from the Satellite List menu.
Transponder
To find the satellite you can also choose a preset
transponder.
Note: You can omit the following steps if you are using a
USALS motor. The satellite positions will be saved
automatically.
Position No.&Save
Assign a position number for each satellite. Important: Once
the satellite has been set up successfully, you must confirm
the number by pressing OK (34) at this point.
Go to X
To make the search for any more satellites easier, you can
directly move to positions that have been saved in the list.
The "Reference" value represents the centre position and
should be orientated to the South.
West/East
Press the W or X navigation buttons (23) to move the
antenna to the West or to the East. Please always monitor
the signal level indicators. Note: If no signal level is indicated
during search, please select a different transponder.
Recalculation
Calculates the internal counter for the different satellite
positions based on the centre position reference value
(South). It is possible that deviation occurs during long-term
use by rotating, mechanical tolerances, and external factors
(wind).
Signal Level Indicators
Signal Intensity
The Signal Intensity indicator shows the total input signal
strength.
Signal Quality
The signal quality is an indicator of interference-free
reception. Orientate your antenna so that the Signal Intensity
and Signal Quality reach their maximum.
Limit setup
You can limit the rotation angle of your antenna to protect it
against any damage from obstacles. Under Limit setup
select the desired direction (West or East). The following
setting will define the maximum rotation angle of your
antenna. To rotate, press the W or X (23) navigation
buttons. Press the OK button (34) to confirm both limits in
sequence. To move the antenna back to the centre position,
select "Go to Reference" and press the OK button (34) to
confirm. The message "Please wait for moving dish to
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SSR 1080 A1 IAN 61193 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SSR 1080 A1 IAN 61193 in the language / languages: English as an attachment in your email.

The manual is 8,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SSR 1080 A1 IAN 61193

Silvercrest SSR 1080 A1 IAN 61193 User Manual - German, Dutch, French, Italian - 201 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info