738646

Silvercrest SSR 1080 A1 IAN 61193 Manual

14
Zoom out
Zoom in
Previous page
1/53
Next page
Digital HD Satellite Receiver SSR 1080 A1
English - 12
In order to open the advanced menu you may need a password. The factory-default
password is: 0000.
If no hard disk information is shown, you will need to format the hard disk with a compatible file
system for your satellite receiver. To do this, press the Menu button (22) and then press the S or T
navigation buttons (23) to select the "Expert Mode" item and finally select "Media". Select the "HDD
Format" item. Next press OK (34) to confirm and another window opens. If the hard disk is divided
into multiple partitions, you can choose which partition should be formatted. Select the option “HDD
Format” and press OK (34) to confirm the start of formatting. A safety prompt will appear. Select
whether you want to format your hard disk using the "FAT" or the "NTFS" file system, or select
"Cancel" to cancel.
CAUTION! Formatting the hard disk will erase all data stored on it. After the hard
disk has been formatted, press the EXIT button (33) to quit the menu and then select
"HDD Information". Here you can display the available storage on the hard disk. To
avoid any loss of data, you should never disconnect the hard disk from the satellite
receiver while the devices are on. First switch the satellite receiver to Standby mode
before disconnecting the hard disk.
Targa does not assume any liability for loss of data or damage resulting from
the use of the USB interface.
The total recording time depends on the size of the hard disk but also on the recorded programmes.
HDMI Connection
Use an HDMI cable to connect your satellite receiver to the TV set. This connection type guarantees
an optimum and loss-free transmission of the video and audio signals to the TV Set. As soon as a TV
set is connected to the satellite receiver using an HDMI cable, your satellite receiver will toggle
automatically to the HDMI signal output.
You can press the MODE button (37) to optimise the screen resolution for HDMI mode. Please note
that the picture may disappear when switching the resolution. So that you are aware of the current
resolution setting, the resolution will be shown briefly on the display (7) of the device (e.g. 480i,
720P, 1080). For optimum resolution on a modern flat-screen display we recommend using the
1080i_50 or 720p_50 setting.
When establishing this connection type, we recommend that you use both a SCART (Euro AV) as
well as an HDMI cable, as many TV sets do not have the HDMI input enabled by default. Via the
conventional SCART cable you will always be able to access the setup menus and customise
settings if no picture appears on the display.
Video and Audio Signal Connection:
All required settings can be found in the section "System Setup" (see page 25).
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SSR 1080 A1 IAN 61193 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SSR 1080 A1 IAN 61193 in the language / languages: English as an attachment in your email.

The manual is 8,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SSR 1080 A1 IAN 61193

Silvercrest SSR 1080 A1 IAN 61193 User Manual - German, Dutch, French, Italian - 201 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info